Decreasing Speed While In Cruise Control; Ignition Key - Triumph Trophy Handbook

General Information
Decreasing Speed while in Cruise
Control
To decrease speed, press and release the
SET/- end of the adjust button. Each press of
the button will decrease the speed by 1 mph
or 1 km/h. If the button is held, the speed will
continuously decrease in
increments.
While decreasing the speed, the display
screen in the instruments will show the new
set speed.
When the desired speed has been achieved,
stop pressing the adjust button. After
4 seconds the display screen will change to
the previous display.
62

Ignition Key

single digit
1. Key number tag
In addition
lock/ignition switch, the ignition key is
required to operate the seat lock, fuel tank
cap, panniers and top box (if equipped).
When the motorcycle is delivered from the
factory, two keys are supplied together with a
small tag bearing the key number. Make a
note of the key number and store the spare
key and key number tag in a safe place away
from the motorcycle.
A transponder is fitted within the key to turn
off the engine immobilizer. To ensure the
immobilizer functions correctly, always have
only one of the ignition keys near the ignition
switch. Having two ignition keys near the
switch may interrupt the signal between the
transponder and the engine immobilizer. In
this situation the engine immobilizer will
remain active until one of the ignition keys is
removed.
1
to operating the steering