Fuse Boxes; Main Fuse Boxes - Triumph Trophy Handbook

Apply a light coat of grease to the terminals
to prevent corrosion.
Cover the positive terminal
protective cap.
Reposition the diagnostic connector and fuse
box bracket.
Refit the battery strap,
diagnostic connector and fuse box bracket is
secured by the strap.
Align the infill panel mounting studs to the
grommets and press down and forwards to
secure.
Align the infill panel to the cockpit and refit
the fastener, tightening to 27 lbf-in (3 Nm).
Trophy SE models only: After battery
reconnection allow the Triumph Electronic
Suspension (TES) system to re-calibrate as
described on page 57.
Maintenance and Adjustment

Fuse Boxes

Main Fuse Boxes

with the
Front of Motorcycle
ensuring the
chsd
1. Front fuse box
2. Rear fuse box
3. ABS fuse box
The three fuse boxes are located beneath the
left hand side panel.
To allow access to the fuse boxes, the left
hand side panel must be removed (see
page 133).
The ABS fuse box is located next to the front
main fuse box.
Always replace blown fuses with new ones
of the correct rating (as specified on the
fuse box cover) and never use a fuse of
higher rating. Use of an incorrect fuse
could lead to an electrical problem,
resulting in motorcycle damage, loss of
motorcycle control and an accident.
2
1
3
Warning
153