Speedometer; Tachometer; Multi-Function Display Screen - Triumph Trophy Handbook

Speedometer

The analogue speedometer indicates the
road speed of the motorcycle. The read-out
displays the motorcycle road speed in
increments of one mile (or kilometer) per
hour.

Tachometer

The tachometer shows the engine speed in
revolutions per minute - rpm (r/min). At the
end of the tachometer range there is the
'red zone'. Engine rpm (r/min) in the red
zone is above maximum recommended
engine speed and is also above the range for
best performance.
Caution
Never allow engine rpm to enter the
'red zone' as severe engine damage may
result.
General Information

Multi-function Display Screen

The multi-function display screen gives
information, messages and warnings about
various motorcycle functions.
information is displayed in three ways -
permanently, automatically as required, or
selected by the rider.
Permanent messages include:
• clock;
• selected gear;
• ambient air temperature;
• coolant temperature;
• front and rear heated seat status (if
equipped and turned on);
• heated grip status (if equipped and
turned on);
• fuel gauge.
Automatic messages include:
• information messages;
• warning messages.
Automatic messages may be accompanied
by a warning light.
Messages which can be selected by the rider
include:
• trip computer 1;
• trip computer 2;
• settings menu (if the motorcycle is
stationary);
• adjustment menu (if the motorcycle is
moving).
Full details of the multi-function display
screen features and operation are described
starting on page 34.
This
25