Triumph Electronic Suspension (Tes) Warning Light (If Electronic Suspension Is Fitted) - Triumph Trophy Handbook

Triumph trophy and trophy se motorcycles
Hide thumbs Also See for Trophy:
Table of Contents

Advertisement

Triumph Electronic Suspension (TES)
Warning Light (if electronic
suspension is fitted)
Triumph Electronic Suspension is
fitted to Trophy SE models only.
When the ignition is switched on
the warning light will illuminate
for 1.5 seconds and then go out.
10:08
ODO
1
chdo
1.
TES warning light
2. Instrument message
General Information
The warning light has three modes:
Adjustment
warning light will flash once per second,
and the lower message screen will
display the alternating messages PLEASE
WAIT
PROGRESS.
complete the message ADJUSTMENT
COMPLETE will be displayed for a short
time.
N
26°C
Calibration (see page 57) - the warning
light will flash twice every second during
TRIP 1
0
system recalibration, and the lower
MPH
message
144.2
alternating messages PLEASE WAIT and
RECALIBRATION IN PROGRESS.
1892
During recalibration the motorcycle must
TES SYSTEM
remain stationary. Riding the motorcycle
ADJUSTMENT
IN PROGRESS
will cause the recalibration to be halted
2
and the warning light to remain lit.
Fault - If the warning light illuminates
continuously or at any other time it
indicates a fault with the system that
requires investigation.
Full details of the Triumph Electronic
Suspension (TES) system are described
starting on page 58.
(see
page 58)
-
the
and
ADJUSTMENT
IN
Once
adjustment
screen
will
display
the
31
is

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trophy se

Table of Contents