Rider's Seat - Triumph Trophy Handbook

Rider's Seat

chsu
1. Rider's seat
2. Front seat tangs
3. Heated seat connector
Remove the Rider's Seat
Remove the rear seat (see page 76).
If heated seats are fitted, disconnect the seat
heating connector.
Grasp the rider's seat on either side, and slide
it rearwards and upwards for complete
removal from the motorcycle.
General Information
Re-install the seat
Engage the seat's front rail fully into the
1
bracket at the rear of the fuel tank and lower
3
the rear on to the subframe brackets. Push
down firmly on the rear of the seat.
If heated seats are fitted, reconnect the seat
heating connector.
Re-install the rear seat (see page 76).
2
The rider's seat is only correctly retained
and supported once the rear seat is
correctly fitted. Never ride the motorcycle
with the rear seat detached or removed, as
the front seat will not be secured and may
move.
A loose or detached seat could cause loss
of motorcycle control and an accident.
Warning
77