Navigating The Menus - Christie DS+60 User Manual

Section 3: Operation
3.3 Navigating the
Menus
On-line Help
3-10 Christie DS+60/DW30/Matrix 3000 User's Manual
Laser
Press to activate the laser pointer on the remote. This feature is useful when
making presentations - just point the remote at the screen to highlight an area of your
presentation. Keep the
you are pointing. Release it to turn it off. The
laser pointer works best in an environment
where ambient lighting can be controlled.
NOTE: The batteries must be in the wired IR
remote for the key to work.
Most of the controls for the projector are accessed from within the projector's menu
system. There are several groups of related functions, with each group selectable from
the Main menu as shown at right. Press
at any time to display this Main menu.
Menu
On the IR remote, either enter the number
corresponding to the function menu you
wish to access, such as
Settings menu, or use the
any keypad to highlight the desired option,
then press . The corresponding function
menu or pull-down list of further options
will then appear.
With a function menu displayed, navigate in
a similar manner—enter a menu option number for any numbered option or use the
keys to highlight the desired option, then press
menus have a scroll bar on the right—use the arrow keys to access the remainder of
the menu. Locked items or items that do not pertain to the current action or condition
appear dimmed and cannot be selected.
NOTES: 1) If there is no signal present, all source-dependent adjustments are
disabled. 2) After 15 minutes of inactivity, the projector leaves the menu system and
returns to the presentation. 3) The Status menu is read-only.
When finished with a function menu, do one of the following:
• Press
to return to the previous screen
Exit
• Press
to leave the menu system and return to the presentation
Menu
If at any time you are uncertain what to do next, press
information about the current menu or highlighted option. Press
addition, a line of "hint" text is included at the bottom of some menus.
key depressed while
for the Image
2
keys on
Figure 3.4. Entering the Menu System
CAUTION
LASER RADIATION
DO NOT STARE INTO BEAM
LASER DIODE
Wavelength 670nm
Max Output 1mW
CLASS II LASER PRODUCT
(Enter). Extra long
to display summary
Help
again to exit. In
Help
013-100149-02 Rev. 1 (01/07)