Components - Christie DS+60 User Manual

How the projector works
1.2

Components

013-100149-02 Rev. 1 (01/07)
The light generated by the lamp(s) is then sequentially filtered into the RGB color
primaries by the spinning color wheel(s) and presented to the single chip DMD,
located in the light engine, in sequence. The reflected light from the DMD chip then
passes through the projection lens to the screen.
Ensure you have received all the following components before using your projector.
•
Wireless IR Remote (with batteries)
•
Wired Remote Cable (10 ft.)
•
Line Cord (North American and European)
•
Computer Cable (Dsub 15 to DVI-I)
•
DVI-I Cable
•
S-Video Cable
•
User's Manual
NOTE: For a complete list of optional components that can be used with your
projector, refer to Section 6 – Specifications. Call Christie or your dealer, if
required.
Figure 1.1 How the Projector Works
Christie DS+60/DW30/Matrix 3000 User's Manual
Section 1: Introduction
1-3