Selection And Confirmation Of The Sewing Patterns; Combination Of The Work Clamp Foot And The Feed Plate - JUKI LK-1900A Instruction Manual

4. Selection and confirmation of the sewing patterns

WARNING :
In case of using an exclusive work clamp foot, make sure of the shape of the sewing pattern. If the
sewing pattern extends outside the work clamp foot, the needle interferes with the work clamp foot
during sewing, resulting in the danger of the needle breakage or the like.
1) The patterns for the belt-loop attaching are from No. 17 to No. 22.
As for the way of operation for setting, checking or changing the sewing pattern, refer to the item "Operation
of the sewing machine (basic)" described in the instruction manual for the LK-1900A.
After setting, make sure of the needle entry point whether or not the needle interferes with
the work clamp foot.
* The calling has been set to ineffective at the time of delivery since the needle interferes with the standard
work clamp foot which has been provided with the machine. When using this function, use "Setting the
pattern data calling effective or ineffective" of the memory switch function to make the calling effective. As
for the way of operation for setting, refer to the item "How to use the memory switch" described in the
instruction manual for the LK-1900A.
Pattern No.
Lengthwise
17
18
19
20
21
22

5. Combination of the work clamp foot and the feed plate

WARNING :
In case of using an exclusive work clamp foot, make sure of the shape of the sewing pattern. If the
sewing pattern extends outside the work clamp foot, the needle interferes with the work clamp foot
during sewing, resulting in the danger of the needle breakage or the like.
Make use of the appropriate combination of the work clamp foot and the feed plate in accordance with the sewing
conditions. The combination for the standard delivery and the special order is shown in the following table.
Spec
LK-1902A
Standard
For large size
(Special order part)
For extra large size
(Special order part)
Sewing size (mm)
Crosswise
0 10
0 10
0 25
0 25
0 25
0 35
Feed plate
17
2
7
27
2.4
7
37
2.4
7
Sewing size is the dimension when
Number of stitches
the enlargement rate is 100%.
21
28
28
36
42
42
Part No.
13544465
Part No.
13545660
Part No.
13547161
64
Work clamp foot
Part No.
10
14143002
24.8
Part No.
2.8
13545504
27.4
Part No.
10
13545801
37
Part No.
2.8
13547005
37.4