7. Selection and confirmation of the sewing patterns
WARNING :
In case of using an exclusive work clamp foot� make sure of the shape of the sewing pattern. If the
sewing pattern extends outside the work clamp foot� the needle interferes with the work clamp foot
during sewing� resulting in the danger of the needle breakage or the like.
) The patterns for eyelet buttonhole bartackng are from No. to No. 3.
2) When the materal closng operaton s performed, the maxmum sewng sze s 3x7mm. Set the most
approprate sze usng the enlargement/reducton functon. As for the way of operaton for settng,
checkng or changng the sewng pattern, refer to the tem "Operaton of the sewng machne (basc)"
descrbed n the nstructon materal for the LK-900A.
After setting� check the needle entry point whether or not the needle interferes with the
work clamp foot.
Pattern No.
Lengthwse
2.5
2
2.5
3
2.5
Sewng sze (mm)
Crosswse
6
6
6
-
Sewng sze s the dmenson when
Number of sttches
the enlargement rate s 00%.
2
28
36
62
-