JUKI LK-1900A Instruction Manual page 34

(2) Sewing operation
Operation example : Perform sewing with the contents of the registered C1.
d
h
h
1) Turn ON the power switch.
2) Set the pattern No. to "C1-1 " using the
key. Scroll as follows :
/ 0 to 99 ,/ P1 to P50 ,/ C1 to C20 ,
3) Press the key. When the sewing LED lights
up, the work clamp feet will go up after having
moved.
4) If the contour of the pattern is acceptable, the
sewing can be made.
5) Every time the sewing is finished, the step is made
in the order of the combination. After completing
one cycle of sewing, the step returns to the first
step. The sewing can be made repeatedly.
/ "C1. 1" / "C1. 2" / "C1. 3"
* When you desire to return the pattern to the
previous one or skip the next pattern after sewing,
press or
LED lights up. The indication of the pattern will
change, and the work clamp feet will move to the
sewing start point.
* If the contents of P1 to P50 are changed after
registration of C1 to C20, the contents of P1 to P50
used in C1 to C20 will change. So, be careful.
* Make sure of the contour of the pattern for each of
the patterns. (Refer to the item "Checking the
contour of the sewing pattern".)
28
key in a state that the sewing
or