Operation Of The Sewing Machine (Advanced); Performing Sewing Using The Pattern Keys ( And ) - JUKI LK-1900A Instruction Manual

[6] OPERATION OF THE SEWING MACHINE (ADVANCED)

1. Performing sewing using the pattern keys (
Patterns (No.1 to 200) which have been already registered can be registered to P1 to P50. It is possible to
change and register the scale, max. speed limitation, thread tension and sewing position. Same as the
patterns (No.1 to 200), P1 to P50 are used by the selection by scrolling the pattern Nos. The pattern calling
from P1 to P25 can be made by one-touch as well.
* When selecting P6 to P25, perform the selection by combination (simultaneous pressing) of
, and
P-No. Selection key
P1 P1
P2 P2
P3 P3
P4 P4
P5 P5
P6 P1+P2
P7 P1+P3
(1) Register to the pattern key
Setting example : Register following setting to the P2., Pattern No. 3, X scale rate : 50%, Y Scale rate : 80%,
Max. speed limitation : 2,000 rpm, Thread tension : "50", Pattern position : 0.5 mm to the
right and 1 mm to the front
1) Turn ON the power switch and press
to enter mode setting (memory switch setting).
(Sewing LED should be put out.)
2) Indicate the pattern register mode with
or key.
3) Press key.
Enter the pattern register mode.
4) Press key. (Select P-No. to be registered.)
Selection can be performed with
key.
5) Press key to indicate the Pattern No
Set the Pattern No. to "3" with
key.
keys as shown in the table below.
P-No. Selection key
P8 P1+P4
P9 P1+P5
P10 P2+P3
P11 P2+P4
P12 P2+P5
P13 P3+P4
P14 P3+P5
key
or
, ,
P-No. Selection key P-No.
P15 P4+P5
P16 P1+P2+P3
P17 P1+P2+P4
P18 P1+P2+P5
P19 P1+P3+P4
P20 P1+P3+P5
P21 P1+P4+P5
e
e
e
e
or
.
e
24
, and )
Selection key
P22 P2+P3+P4
P23 P2+P3+P5
P24 P2+P4+P5
P25 P3+P4+P5
–
, ,