Installing And Connecting The Power Switch - JUKI LK-1900A Instruction Manual

4. Installing and connecting the power switch

(2) Connecting the power source cord
Voltage specifications at the time of delivery from the factry are indicated on the voltage indication seal.
Connect the cord in accordance with the specifications.
Rating label
• Connecting single phase 200V, 220V, 230V and 240V
Light blue
Table
Control box
Green/Yellow
Brown
• Connecting three phase 200V, 220V and 240V
White
Table
Control box
Green/Yellow
Black
Red
Voltage caution seal
Voltage indication seal (3-phase type only)
Light blue
Green/Yellow
Brown
Power switch
White
Green/Yellow
Red
Black
Power switch
(1) Installing the power switch
Fix power switch
screws .
Fix the cable with staples
as accessories in accordance with the forms of use.
* Five staples
operation panel cable are supplied as accessories.
1. Never use under the wrong voltage
and phase.
2. When changing the voltage, refer to
the item of "Changing the voltage
of 100 / 200V" (P.36).
Plug
Power source cord
Plug
Power source cord
5
under the machine table with wood
supplied with the machine
including the staple for fixing the
AC200 V
Brown
AC220 V
AC230 V
Light
AC240 V
blue
Green/
GND
Yellow
White
AC200 V
AC220 V
Black
AC240 V
Red
Green/
GND
Yellow