3. Sewing
a
4. Change to the other sewing pattern
h
h
WARNING :
Make sure without fail of the contour of the sewing pattern after selection of the sewing pattern.
If the sewing pattern extends outside the work clamp feet, the needle will interfere with the work clamp
feet during sewing, causing dangerous troubles including needle breakage.
1) Set a workpiece on the work clamp foot section.
2) Depress the pedal switch to the first step, and the
work clamp feet will come down. If you detach your
foot from the pedal switch, the work clamp feet will
go up.
3) Depress the pedal switch to the second step after
descending the work clamp feet at the first step,
and the sewing machine will start sewing.
4) After the sewing machine completes sewing, the
work clamp feet will go up, and return to the sewing
start position.
1) Make the Sewing LED go off with
2) Press
key and select the item of pattern No
.
3) Set the pattern No. with
4) Similarly, setting of X/Y scale, speed, etc. is
performed.
5) When
key is pressed, the Sewing LED lights
up and the sewing machine is in the sewing ready
state.
20
key.
key or
key