Table of Contents
Advertisement
workpieces (the specified number of workpieces) thai can be sewn with a bobbin is reached.
The bobbin thread counter indicates the finished number of workpieces in the two different methods. You can
select either the adding method or the subtracting method.
2. Performing sewing be means of "Pattern enlarging I reducing function"
(Refer the setting of panern enlarging I reducing to "VIII. How to use the memory switch".)
23))
1) Press the [Bobbin thread counter] key.
Press the numerical key, and input the specified
number of workpieces
2) Insert a floppy disk into the floppy disk inserting slot.
Input a sewing pattern No. desired and press the
[Enter] key.
3) Every time the sewing machine finishes a workpiece,
counting is made by one.
4) When the sewing machine finishes the specified
number of workpieces. the sewing machine will stop.
5) Replace the bobbin with a new one, and press the
[Bobbin thread replacing] key.
6) Repeat the steps of procedure tram step 3).
(Caution)
The indication of bobbin thread counter is under
the state of delivery of the memory switch :
Adding method
l
Production counter-ON
l
1) Insert a floppy disk into the floppy disk inserting slot
and input a sewing pattern N
2) Input a scale (%) by which the sewing pattern is to be
enlarged / reduced in the X or Y direction.
(Caution)
The pattern can be enlarged I reduced in the range
of 1% to 400% while the size of of pattern written
in the floppy disk is taken as 100%.
3) Press the [Enter] key, and the specified size of the
sewing pattern will be read in the sewing machine.
Then, the machine will be ready for sewing.
(Caution)
1. After the pattern is enlarged or reduced, make
sure the movement whether the needle and the
feeding frame interferes with each other.
2. The method of enlargeing I reducing is
"number of stitches increasing I reducing"
under the state of delivery of the memory
switch.
. desired.
O
Advertisement
Table of Contents
