1. Manuals
  2. Brands
  3. LXE Manuals
  4. Printer
  5. 2325
  6. Reference manual

LXE 2325 Vehicle Printer Reference Manual

Vehicle printer
Hide thumbs Also See for 2325 Vehicle Printer:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation & Operator's Manual
2325 Vehicle Printer

Reference Guide

IMPORTANT NOTICE
The LXE 2325 Vehicle Printer is obsolete.
This electronic manual has been made available as a courtesy to LXE's
2325 customers. Please contact your LXE customer support representative
for assistance.
Copyright © 2003 by LXE Inc.
An EMS Technologies Company
All Rights Reserved
2325A138REFGD
E-EQ-2325VPRG-A-ARC
November 1999
Revision A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2325 Vehicle Printer and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for LXE 2325 Vehicle Printer

Summary of Contents for LXE 2325 Vehicle Printer

  • Page 1: Reference Guide

    Reference Guide IMPORTANT NOTICE The LXE 2325 Vehicle Printer is obsolete. This electronic manual has been made available as a courtesy to LXE's 2325 customers. Please contact your LXE customer support representative for assistance. Copyright © 2003 by LXE Inc.
  • Page 2 Notice: LXE Inc. reserves the right to make improvements or changes in the products described in this manual at any time without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, LXE assumes no liability resulting from any errors or omissions in this document, or from the use of the information contained herein.

  • Page 3: Table Of Contents

    Specifications and Features.............. 1-9 Printer Keypad.................. 1-11 Printer Panel Buttons................1-11 Printer Self Test..................1-12 Printer Panel Indicators ................1-13 Printer Panel Conditions .................1-13 Cradle Indicators..................1-14 Configuration..................1-15 Dip Switches....................1-15 Default Factory Settings ................1-15 Baud Rate Selection .................1-16 E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 4 Tab ......................2-24 Character Control ................2-26 Font Selection ................... 2-26 Character Pitch ..................2-27 Character Style ..................2-30 Miscellaneous ................... 2-38 Bit Image Control................2-39 Creating 8-Pin Bit Images............... 2-39 Density Change ..................2-45 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...
  • Page 5 Figure 1-2 Proper Connection of the Vehicle Cable ............1-5 Figure 1-3 Three Connectors on Vehicle Printer ..............1-7 Figure 1-4 RS-232 Pinouts....................1-7 Figure 1-5 9-Pin RS-232 Description...................1-8 Figure 1-6 Printer Panel Buttons..................1-11 Figure 1-7 Printer Panel Indicators ..................1-13 Figure 1-8 Cradle Indicators ....................1-14 E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 6 Table of Contents 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 7: Introduction

    Specifications and Features.............. 1-9 Printer Keypad.................. 1-11 Printer Panel Buttons................1-11 Printer Self Test..................1-12 Printer Panel Indicators ................1-13 Printer Panel Conditions ................1-13 Cradle Indicators..................1-14 Configuration..................1-15 Dip Switches....................1-15 Default Factory Settings ................1-15 Baud Rate Selection ..................1-16 E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 8 Figure 1-3 Three Connectors on Vehicle Printer ..............1-7 Figure 1-4 RS-232 Pinouts....................1-7 Figure 1-5 9-Pin RS-232 Description................... 1-8 Figure 1-6 Printer Panel Buttons..................1-11 Figure 1-7 Printer Panel Indicators ..................1-13 Figure 1-8 Cradle Indicators ....................1-14 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 9: Chapter 1 Introduction And Specifications

    (LXE DocID 2325A137OPGD) for operation and installation information The portable LXE™ 2325 Vehicle Printer, for use with LXE’s 2325 handheld computers, combines a rugged dot matrix printer with the charging and storage functions of a storage cradle for the handheld computer.

  • Page 10: About This Guide

    Introduction About This Guide Refer to the LXE 2325 Operator’s Guide (LXE DocID 2325A136OPGD) for instructions when operating a 2325 in the 2325 Vehicle Printer. This guide presents information on the printer, paper, ribbons, printer settings, indicator lights, charging the battery, care and maintenance, programming the printer, and supported character sets.

  • Page 11: Connect Power Supplies

    Internal 12V Battery Instruction Important The LXE 2325 Vehicle Printer is shipped with a disconnected battery. This method preserves the overall life of the battery as well as maintains the original charge. Make sure to connect the battery before using the printer.

  • Page 12: Battery Life

    The printer is turned off and left plugged into a charger when not in use. The battery is disconnected if the printer is to be unused for more than four weeks. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 13: Vehicle To Battery Connection

    Lead acid gel battery. Figure 1-2 Proper Connection of the Vehicle Cable The printer chassis (green wire) is isolated from the printer electronic ground. Therefore, the printer can be used with positive or negative ground vehicle systems. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 14: Fuse Replacement

    The internal fuses F1 and F2 are rated at F1: 250V 4 Amps Slow Blow F2: 250V 3 Amps Fast Blow Caution: For continued protection against risk of fire, replace only with the same type and rating of fuse. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 15: Connectors

    PC/AT standard 9-pin “D” male connector with pin 9 capable of supplying 5 VDC at 200mA (max) for an external barcode scanner. Pin 1 Pin 5 Pin 6 Pin 9 Figure 1-4 RS-232 Pinouts E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 16: Optional Internal Modem

    Plug one end of the telephone cord (four conductor flat cable) into the 6- pin RJ-45 connector and the other end into an analog telephone wall jack. The modem supports the AT Command set with extensions and can operate with industry standard communication software. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 17: Specifications And Features

    2325 communications active • 2325 battery charging • Printer power on • Printer battery charging • Printer on-line • User Controls Printer Power On/Off • Printer On-line/Off-line • Line Feed • Back Space • Form Feed E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 18 15% to 85% humidity, non- condensing • -30°C to 70°C, -22°F to 160°F 5% to 95% humidity, non-condensing storage • Power Input 10 - 30 VDC at 3 amps maximum Requirements • Options Spare battery • Spare ribbons 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 19: Printer Keypad

    The printer must then be turned OFF and back ON. This will set the top of form to the correct position. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 20: Printer Self Test

    To determine if the print mechanism is functioning properly: Turn the printer OFF. Turn the printer ON while holding down one of the following buttons: BACK FEED for NLQ test LINE FEED for DRAFT test. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 21: Printer Panel Indicators

    On line Light on Light on Paper Empty Light on Light on Light on Charging Fully charged Light off Power supply error Flashing ROM/RAM error Flashing Flashing Flashing Flashing Flashing Flashing Carriage position error E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 22: Cradle Indicators

    Figure 1-8 Cradle Indicators Green. The battery is charging. When battery is fully charged, the light goes out. DATA Green. The 2325 is sending data to the printer. When transmission is complete, the light goes out. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 23: Configuration

    7 bits 8 bits Handshaking Protocol X-ON/X-OFF Auto Line Feed CR=CR CR=CR+LF Default Factory Settings BAUD RATE 9600 bps PARITY CHECK PARITY CHARACTER CODE LEVEL 8 Bits HANDSHAKING X-ON/X-OFF NO (CR=CR) AUTO LINE FEED E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 24: Baud Rate Selection

    1-16 Configuration Baud Rate Selection Select # Setting Baud Rate 4800 2400 1200 9600 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 25: Table Of Contents

    Enable Paper Empty Sensor ............2-15 Paper Feed Control .................. 2-16 Vertical Feed..................2-16 Line Feed ..................2-16 Form Feed ..................2-16 ESC ] Reverse Line Feed................ 2-16 ESC J Execute n/216” Line Spacing ............2-17 E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 26 Cancel Double-Width Character Mode Set by SO ......2-30 ESC ! Change Print Mode Parameters............ 2-30 ESC - Activate/Deactivate Underline Function........2-31 ESC E Set Emphasized Character Mode ..........2-32 ESC F Cancel Emphasized Character Mode .......... 2-32 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...
  • Page 27 Set Double-Speed and Double-Density Bit Image Mode... 2-42 ESC Z Set Quadruple-Density Bit Image Mode........2-42 Density Change..................2-43 ESC ? Change Bit Image Density............2-43 ESC r Select International Character Set ..........2-44 E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 28 2-iv Table of Contents 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 29: Defaults

    *1 Print attributes include the condensed, underline, overline, italic, emphasized, double-strike, super/subscript, double-width, double- height/double-width, and proportional prints. *2 Bit images, NLQ, and graphic characters may be printed bidirectionally by modifying parameter p2 (bit 5) of ESC [ K command. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 30: Control Commands

    ESC ! n Change Print Mode Parameters 1B 21 n ESC * m n1 n2 data Select Bit Image Mode 1B 2A m n1 n2 data ESC - n Activate/Deactivate Underline 1B 2D n Function 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...
  • Page 31 1B 43 00 n ESC D n1 ...n28 NUL Set Horizontal Tab Stops 1B 44 n1 ...n28 00 ESC E Set Emphasized Character 1B 45 Mode ESC F Cancel Emphasized Character 1B 46 Mode E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 32 1B 54 Mode ESC U n Set/Cancel Unidirectional 1B 55 n Printing ESC W n Set/Cancel Double-width 1B 57 n Character Mode ESC X n1 n2 Set Right and Left Margins 1B 58 n1 n2 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...
  • Page 33 ESC _ n Activate/Deactivate Overline 1B 5F n Function ESC k n Select NLQ Font 1B 6B n ESC r n Select International Character 1B 72 n ESC x n Select Print Quality 1B 78 n E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 34: Command Descriptions

    . The printer will be initialized according to these parameters. n1 = 01H: The printer is initialized according to init. n1 = 03H: The printer is initialized according to init and p1 . 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...
  • Page 35 Bit Function Accept p1 Ignore p1 Not used. Not used. AUTO CR AUTO LF Page length 11” 12” Zero font Unslashed Slashed Select character set Character set 1 Character set 2 E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 36 If bit 7 is 0, the printer is initialized according to the settings of that parameter. If bit 2 of p2 is 1 (invalid FF code), the FF code received at the top-of- form (TOF) position is ignored. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 37: Low-Temperature Operation Mode

    If the (n2 x 256 + n1 ) > 1, this command is effective while the printer ignores the surplus data. If the (n2 x 256 + n1 ) = 1, or if a specification for m is 00H or 01H, the printer ignores this command. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 38: Data Control

    DC1 command or the ON/OFF LINE switch is pressed twice. CAN Clear Printer Buffer Format Dec. Hex. Function Clears the print data stored in the image buffer. All of the control commands except for BS, HT, and SO remain unaffected. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 39: Horizontal Motion

    Prints the data in the buffer and returns the print position to the left margin. If the auto line feed (LF) function is enabled by ESC 5 1 command, a line feed automatically accompanies a carriage return. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 40: Carriage Return Control

    CR command. If n is 00H or 30H, the printer prints data in the buffer and performs a carriage return with no line feed. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 41: Print Quality

    = 00H or 30H: Draft mode n = 01H or 31H: NLQ mode Dec. 27 120 n Hex. 1B 78 n Function Selects the draft or near-letter quality (NLQ) mode with n as above. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 42: Print Direction

    00H or 30H for n produces bi-directional printing; 01H or 31H for n, unidirectional printing from left to right. If the printer receives this command halfway on a line, the setting takes effect on that line and the following lines. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 43: Paper Empty Sensor Control

    Enables the paper empty sensor. If the paper empty sensor detects the paper empty state, the printer goes off-line. To resume printing, load paper and press the ON/OFF LINE switch. This command setting is a default. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 44: Paper Feed Control

    The ESC FF command is functionally equivalent to the FF command. ESC ] Reverse Line Feed Format ESC ] Dec. 27 93 Hex. 1B 5D 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 45: Esc J Execute N/216" Line Spacing

    1B 4A n Function Advances the paper n/216” for one line only, after printing the data stored in the buffer. This command does not affect the current line feed pitch for the subsequent lines. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 46: Skip-Over Perforation

    TOF position. ESC O Deactivate Skip-Over Perforation Function Format ESC O Dec. 27 79 Hex. 1B 4F Function Deactivates the skip-over perforation function set by an ESC N command. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 47: Line Spacing

    1/72”. If no ESC A command has been sent in advance, this command sets the default line spacing of 1/6”. This setting remains effective until another spacing is specified. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 48 01H ≤ n ≤ FFH Dec. 27 65 n Hex. 1B 41 n Function Sets the text line spacing to n/72”. This setting takes effect when the printer receives an ESC 2 command. Refer to ESC 2 command. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 49: Page Format Control

    This command takes effect even if the printer receives it halfway on a line. This command cancels the skip-over perforation function set by an ESC N command. The vertical TAB stops remain unaffected. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 50: Margins

    The valid ranges of n1 and n2 depend upon the character size as listed below: When the double-width character mode is selected, the right and left margins are set according to the normal character size. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...
  • Page 51 04H ≤ n2 ≤ 89H Condensed 01H ≤ n1 ≤ 9DH 05H ≤ n2 ≤ A0H Condensed elite When the double-width character mode is selected, the right and left margins are set according to the normal character size. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 52: Tab

    Sets the vertical tab stop positions up to 64 at the lines specified by n1 ... n64 on the same page. The tab stop positions are stored as absolute values obtained by multiplying the number of lines by the current line spacing. Tab stop 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 53: Esc D Set Horizontal Tab Stops

    Cancels the vertical tab stops set by an ESC B command, and resets the horizontal tab stops set by an ESC D command to the default positions (every eight positions). After the printer receives this command, VT commands become functionally equivalent to LF commands. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 54: Font Selection

    Dec. 27 107 n Hex. 1B 6B n Function Prints data with NLQ font selected by n: Font Prestige Quadro Brougham Gothic n should be character 0 through 3 (30 to 33 in hex.). 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 55: Character Pitch

    A DC2 or ESC P command cancels this setting. ESC P Set/Cancel Proportional Spacing Format ESC P n n = 00H or 30H: Cancel proportional spacing n = 01H or 31H: Set proportional spacing Dec. 27 80 n Hex. 1B 50 n E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 56: Esc

    Allows the printer to print (n1 + n2 x 256) characters from the All- character Code Set. To print characters, the corresponding codes must be sent immediately following this command. ESC ^ Print One Character from All-character Code Set 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...
  • Page 57 Dec. 27 94 Hex. 1B 5E Function Allows the printer to print only one character from the All-character Code Set. To print a character, the corresponding code must be sent immediately following this command. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 58: Character Style

    This mode can be canceled by a DC 2, ESC :, ESC P, ESC I, or ESC [ K command. DC4 Cancel Double-Width Character Mode Set by SO Format Dec. Hex. Function Cancels the double-width character mode set by an SO command. ESC ! Change Print Mode Parameters 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 59: Esc - Activate/Deactivate Underline Function

    If bit 0, bit 1 and bit 2 of the parameters are zero or the parameter bits are all zero, the pica pitch is selected. Bit 5 can cancel the mode set by an SO command. ESC - Activate/Deactivate Underline Function E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 60 Cancel Emphasized Character Mode Format ESC F Dec. 27 70 Hex. 1B 46 Function Cancels the emphasized character mode set by an ESC E command. ESC G Set Double-Strike Character Mode Format ESC G Dec. 27 71 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 61: Esc H Cancel Double-Strike Character Mode

    This mode can be canceled by an ESC T command. ESC T Cancel Super-/Subscript Print Mode Format ESC T Dec. 27 84 Hex. 1B 54 Function Cancels the super/subscript print mode set by an ESC S command. ESC W Set/Cancel Double-Width Character Mode E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 62 To make your desired settings, add significant decimal values together and use the sum of each byte in m3 and m4 . Example: To print double-height/double width characters with double line spacing 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...
  • Page 63 Normal-height character Definition of Attribute Byte Note: If bit 2 or 3 is 1, the character width setting is ignored. Decimal Values Settings Bit 7 (MSB) 128 = 2 Bit 6 64 = 2 E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 64: Esc _ Activate/Deactivate Overline Function

    Activates or deactivates the overline function. After receiving this command with n being set to 01H or 31H, the printer prints the subsequent data with an overline. A specification of 00H or 30H for n deactivates the overline function. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 65: Miscellaneous

    = 01H or 09H Draft elite Draft mode in elite pitch n = 02H, 03H or 0AH Currently selected NLQ font n = 0BH NLQ alternate Currently selected NLQ (Italic) font in italics E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 66: Bit Image Control

    Prints 8-pin bit images at the selected horizontal density (m). First define the bit image density with the attribute m and the total number of columns to print the bit image with the variables n1 and n2. Input bit image data to fire pins. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 67: Bit Image Control

    255. To reserve more columns for bit images, use the numbers n1 and n2 . The total number of columns for bit images are expressed with the calculation: n1 + n2 x 256. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 68 64 = 2 Bit 5 32 = 2 Bit 4 16 = 2 Bit 3 8 = 2 Bit 2 4 = 2 Bit 1 2 = 2 Bit 0 (LSB) 1 = 2 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 69: Esc K Set Single-Density Bit Image Mode

    : Total number of columns to print bit image = n1 + n2 x 256 1 <= n1 + 256 x n2 <= 960 data: Bit image data Dec. 27 76 n1 n2 data Hex. 1B 4C n1 n2 data E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 70 (n1 + n2 x 256) columns. Adjacent dots are not printed so that the printing speed is not reduced. Define n1 , n2 , and data in the same way as for the ESC * command. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 71: Density Change

    See also ESC K, ESC L, ESC Y, ESC Z, and ESC * commands. Horizontal Max. Bit Image Density Number of Equivalent Mode (dots/inch) Dots/Line Codes Single-density ESC K Double- ESC L density Double-speed ESC Y and Double- density Quadruple- 1920 ESC Z density E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 72 UK I n = 04H Denmark I n = 05H Sweden n = 06H Italy n = 07H Spain I n = 08H Netherlands n = 09H Norway I n = 0AH Denmark II 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 73: Density Change

    = 0CH UK II n = 0DH France II n = 0EH Norway II n = 0FH South Africa n = 10H Japan n = 11H Latin America The USA character set is the default. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 74 2-46 Bit Image Control - Density Change 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 75: Table Of Contents

    Character Set 1................... 3-1 Character Set 2................... 3-2 All-Character Code Set ..............3-3 Multilingual Character Set 1 .............. 3-4 Multilingual Character Set 2 .............. 3-5 Multilingual, All-Character Set ............3-6 Other 17 Countries ................3-7 E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 76 3-ii Table of Contents 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 77: Character Set 1

    Chapter 3 Character Set Tables Character Set 1 E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 78 Character Set 2 Character Set 2 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 79: All-Character Code Set

    All-Character Code Set All-Character Code Set E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 80: Multilingual Character Set 1

    Multilingual Character Set 1 Multilingual Character Set 1 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 81: Multilingual Character Set 2

    Multilingual Character Set 2 Multilingual Character Set 2 E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 82: Multilingual, All-Character Set

    Multilingual, All-Character Set Multilingual, All-Character Set 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 83: Other 17 Countries

    Other 17 Countries Other 17 Countries E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 84 Other 17 Countries 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 85: Chapter 4 Software Controlled Universal

    Table of Contents HAPTER OFTWARE ONTROLLED NIVERSAL (SCUSS) ERIAL WITCH Introduction ..................4-1 Example......................4-2 SETPRINT.C..................4-3 E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 86 4-ii Table of Contents 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...
  • Page 87 The SCUSS firmware allows the 2325 approximately 500 mSec to receive the ASCII character. If the character is not received in this window of time or if a bad character is received the SCUSS will switch back to the default port. E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...

  • Page 88: Example

    Repeat step #5 a total of 4 times. After waiting 180 mSec read COM1 (should be an <ACK>). Send character out COM1 (ASCII 1, 2 or 3). Read COM1 should be complement of ASCII character sent. 10. Close port COM1. 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

  • Page 89: Setprint.c

    /* provides a 50 mSec delay */ asrts( COM1, ON ); timer( TICKS_PER_SECOND / 8 ); c = 0xff; c = asigetc( COM1 ); if ( c == 0x06 ) asiputc( COM1, (char)device ); printf( "ACK received\n%d sent\n", device ); E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 90 TICKS_PER_SECOND / 10 ); c = asigetc( COM1 ); c = ~c; c = c&0x00ff; if( c == device ) printf("Switch OK\n"); else printf("Switch failed\n"); asrts( COM1, OFF ); asiquit( COM1 ); return 0; 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...
  • Page 91 Bit Image, Single Density ..... 2-42 Bit Images..........2-39 Factory Settings........1-15 Bit Numbers and Print Head Pins Form Feed ..........2-16 Table............ 2-42 Fuse Buttons............ 1-9 Replacement...........1-6 Cancel/Set Double Wide Character ..2-34 Horizontal Tab ........2-24 Carriage Return........2-11 E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 92 Normal printing ........2-1 Set/Cancel Auto Line Feed....2-12 Skip-over perforation ....2-1, 2-18 Software Controlled Universal Serial Switch ............4-1 Overline Function ......... 2-37 Specifications ..........1-9 Subscript ..........2-33 Superscript ..........2-33 Page length ........2-1, 2-21 Panel 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...
  • Page 93 Vertical Tab ..........2-24 Tab, Horizontal........2-24 Vibration and shock ........1-3 Tab, Vertical ......... 2-24 VT setting..........2-1 Temperature Ranges Recommended ........1-10 Top of Form.........1-11, 2-22 Weight...........1-10 Wire to Vehicle Ground ......1-5 Underline ..........2-32 E-EQ-2325VPRG-A-ARC 2325 Vehicle Printer Reference Guide...
  • Page 94 Index 2325 Vehicle Printer Reference Guide E-EQ-2325VPRG-A-ARC...

Table of Contents