Table of Contents
Advertisement
C
GAMMA CORRECTIONS
When entering the gamma corrections, a warning will be displayed :
"RISK OF INCORRECT ADJUSTMENT OF THE PROJECTOR.
THE GAMMA CORRECTIONS ARE FACTORY ADJUSTED USING
AN ACTAS COLOUR ANALYSER ! THEREFORE, ONLY QUALI-
FIED INSTALLATION OR SERVICE PERSONNEL SHOULD PER-
FORM THESE ADJUSTMENTS ! "
If you are qualified, press the <ENTER> key to continue.
Gamma Corrections
Three items can be selected inside the "Gamma Corrections" menu:
the Blue Gamma Correction, the R & B midlights and the factory
preset.
To carry out the Blue Gamma Correction :
Push the control stick forward or backward to highlight the item
BLUE GAMMA CORRECTION in the menu and then press ENTER.
If EXIT is pressed, the projector will return to the Service menu.
After ENTER is pressed, a text box with message "Adjust with
arrow key" will be displayed on the screen.
Push the control stick forward or backward to adjust the slope, a
text box with a bar scale (Min to Max) will be displayed to visualise
the magnitude of the correction.
Push the control stick to the left or to the right to adjust the
breakpoint, a text box with a numeric bar scale (0-99) will be
displayed to visualise the magnitude of the correction.
Press ENTER to return to the "Gamma Corrections" menu.
5975857 BARCOGRAPHICS 1208s 220197
WARNING
RISK OF INCORRECT
ADJUSTMENT OF THE
PROJECTOR.
THE GAMMA CORRECTIONS ARE
FACTORY ADJUSTED USING AN
ACTAS COLOUR ANALYSER !
THEREFORE, ONLY QUALIFIED
INSTALLATION OR SERVICE
PERSONNEL SHOULD PERFORM
THESE ADJUSTMENTS !
<ENTER> TO CONTINUE
<EXIT> TO RETURN.
GAMMA CORRECTIONS
é
BLUE GAMMA CORRECTION
ç
Adjust slope with
or
Breakpoint with
or
é
ê
R & B MIDLIGHTS
ç
è
Adjust red with
or
blue with
or
FACTORY PRESET
é
ê
Select with
or
then <ENTER>;
<EXIT> to return.
Adjust with arrow key
Min
Gamma corrections
ê
è
BLUE GAMMA
SLOPE
Max
BLUE GAMMA
BREAKPOINT
50
C-1
Advertisement
Table of Contents
