Basic - Digimerge D300 SERIES Installation Manual

System Set
System Set

Basic

Settings for General Parameters.
1. LANGUAGE: Displays the current default language on the DVR (English). This option cannot
be changed.
2. INITIALIZATION: Resets all settings to Factory Default. To change the setting, press the
buttons to highlight, and press the SEL button. A message will appear prompting for User input:
All setup will be returned to Factory Default
• Press the Select key to continue
• Press the Menu key to exit
3. DATE FORMAT: Configuration for the date display on the DVR. Press the
highlight, and press the
• MM-DD-YYYY
• DD-MM-YYYY
• YYYY-MM-DD
4. DATE/TIME: Sets the Date and Time for the unit. Press the
press the SEL key to enter the configuration. Press the
5. INFORMATION: Displays System Information:
6. SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
to highlight, and press the SEL button to accept the changes.
36
Basic
to change the date format:
HDD Capacity:
## GB / ## GB
FPGA Version:
############
Application: ############
RAMDisk Version:
############
Kernel Version: ############
IP Address:
###.###.###.###
MAC Address
##:##:##:##:##:##
INSTALLERS MANUAL |
SECTION 4
Language
English
Initialization
Date Format
MM-DD-YYYY
Date/Time
01-15-2006
Information
Save & Exit
and buttons to
and buttons to highlight, and
buttons to change the date format.
and
©
Copyright 2006 Digimerge Technologies Inc.
and
buttons