Network Set; Ddns Set - Digimerge D300 SERIES Installation Manual

Network Set

4. PTZ CONTROLLER: Setup of the PTZ Controller. Press
and buttons to highlight, and press SEL button to enter the
PTZ Controller menu.
• ID: Set the PTZ Cpontroller ID (001 - 999).
• Model: TB-CN Series - This cannot be changed.
• BAUD RATE: Set the baud rate of the PTZ Controller (2400,4800 or 9600 BPS).
• SAVE & EXIT: saves any changes, and exits to the previous menu.
Network Set
This submenu allows you to change the NETWORK options for the DVR unit. The options in the
DDNS Set menu control access to the DVR using the free DDNS server, and the options in the IP
Set section control local network settings for local access to the DVR.

DDNS Set

The options in the DDNS Set menu allow the DVR unit to be accessed remotely using the Free
DDNS Server and the internet. All information will need to be manually entered based on
information from the free DDNS Setup (see page 35 for details).Set the USE DYNAMIC IP option
to YES if you will be using the Free DNS Website service to connect to your DVR.
• DDNS: Press the
and press the
• DOMAIN NAME: Press the
highlight, and press the
enter setup. Use the Numbers and Letters on
the front panel of the DVR to set the Domain
Name (i.e. To enter the Domain Name
DHU504.digimerge.net, just enter DHU504)
• USER NAME: Press the
setup. Use the Numbers and Letters on the front panel of the DVR to set the Domain Name.
• PASSWORD: Press the
setup. Use the Numbers and Letters on the front panel of the DVR to set the Domain Name.
• DNS STATUS CHECK: Connects to the remote DNS Server to check the Status. Press the
and buttons to highlight, and press the
• SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
buttons to highlight, and press the SEL button to accept the changes.
40
and buttons to highlight,
button to set to NO/YES.
SEL
and
button to set to
SEL
and buttons to highlight, and press the
and buttons to highlight, and press the
Checking DDNS NOW. Please wait... it may take a few minutes
A Status message will appear indicating a PASS or FAIL on the connection:
DDNS Status Check: PASS / FAIL
PTZ Controller Set
ID: 001
Model: TB-CN Series
Baud Rate: 2400 BPS
Save & Exit
Network Set
DDNS:
Domain Name:
buttons to
User Name:
Password:
DDNS Status Check
Save & Exit
button to test the connection:
SEL
INSTALLERS MANUAL |
SECTION 4
DDNS Set
IP Set
YES
########
########
########
button to set to enter
SEL
button to set to enter
SEL
and
©
Copyright 2006 Digimerge Technologies Inc.