Table of Contents
Advertisement
Scheimpflug Adjustment (Diagonal image focusing)
Why?
With the diagonal image focusing corrections, it is possible to obtain uniform focus for the total projected image.
These corrections must be repeated for each color. The Diagonal image focusing is repeated 3 times, first for green, then
for red and then for blue.
Attention
First, be sure that the CRT projection angle is correctly adjusted, otherwise it is not possible to obtain proper overall focus
of the image.
Scheimpflug Adjustment Procedure
1
Press ENTER to start the green adjustment (Menu 1).
Press EXIT to return to CRT Projection Angle Adjustment.
Press ADJUST to return to Operational mode.
Example: Scheimpflug Adjustment for the Red color
2
Equalize diagonally the focus from left (bottom) to right (top) by turning screw 03 of the projected color (Image 1).
3
Equalize now diagonally the focus from left (top) to right (bottom) by turning screw 02 (Image 2).
DIAGONAL IMAGE FOCUSING
1.TURN THE SCREW MARKED 01
TO FOCUS THE IMAGE
DIAGONALLY FROM LEFT
(BOTTOM) TO RIGHT (TOP).
2.TURN THE SCREW MARKED 02
TO FOCUS THE IMAGE
DIAGONALLY FROM LEFT (TOP)
TO RIGHT (BOTTOM).
<ENTER> TO CONTINUE
<EXIT> TO RETURN
Menu 1
ÃGÃÃÃ ÃÃÃÃÃÃÃÃÃÃÃÃ
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃGÃÃÃÃÃÃ
ÃÃÃÃÃÃ ÃÃÃÃÃÃÃÃÃÃÃÃS
S
ÃÃ
ÃÃ
Ã
B…rr
ÃÃ!Ã
ÃÃ"
Srq
ÃÃ#Ã
ÃÃ$
7yrˆ
Ã
To optimize the image focusing, repeat the optical lens focusing.
After finishing the Installation Adjustment Procedure, the main menu returns on the screen.
5976195 BARCOCINE 9 31012002
04
Image 1
T purv€ ƒsyˆ tÃ6 qwˆ†‡€ r‡Ã†p…r †Ã$
$ %
&
'
Installation Adjustment Mode
05
* +
(
)
7-7
Advertisement
Table of Contents
