4
INSTALLATION SETUP
Access to Controls
Warning
Risk of electric shock !
The installation should only be done by BARCO authorized service personnel
Opening the top cover
During the projector setup and installation it is necessary to open the top cover. Follow the procedure described below :
1
Turn the locking screw with a screwdriver counter clockwise (Image 1).
Image 1
2
Lift up and pivot the top cover backwards (Image 2).
Image 2
Caution:
The projector's top cover is not supported with locking hinge. Open with care and support the cover with your hand.
5976195 BARCOCINE 9 31012002
Installation setup
4-1