Step 4: Before Stepping On - Segway PT i2 Getting Started Manual

Step 4: Before Stepping On

Your Segway PT is on, but it is not balancing. While standing behind
the Segway PT, center the Handlebar and level the Powerbase. Use
the Balance Indicator lights to help you. If any of the four outer
Balance Indicator lights are red, tilt the Powerbase or Handlebar in
the opposite direction of the light(s). When the Segway PT is ready to
enter Balance Mode, the center Balance Indicator light will light up
green. Make sure your InfoKey Controller is installed in the Dock prior
to stepping on.
68