Table of Contents
Advertisement
You can program the image quality for transferring to the DX-PC4E (Remote Operation Software).
Highlight the box beside Remote Quality and press the
selectable from Very High, High, Standard and Low.
LAN Setup Screen
Highlight the box beside Type and press the
(PPPoE).
Selecting Manual from the Type allows you to set up LAN parameters manually.
NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from your
network administrator.
Change the numbers by highlighting them and using the Up and Down arrow buttons to increase or
decrease the number.
The factory default LAN settings are:
IP Address:
Gateway:
Subnet Mask:
Highlight the box beside DNS Server and press the
server. If you set up the DNS Server, the domain name of the DVRNS server instead of the IP
address can be used during the DVRNS Server setup. Refer to the DVRNS Setup section for details.
Highlight Port Number Setup... and press the
appears.
Figure 64 — LAN (Manual) Setup screen.
192.168.1.129
192.168.1.254
255.255.255.0
Four-Channel Digital Video Recorder
button. The image quality can be
button to select from Manual, DHCP and ADSL
button to enter the IP address of the DNS
button. The Port Number Setup screen
47
Advertisement
Table of Contents
