Table of Contents
Advertisement
User's Manual
Modem Setup
Figure 68 — Modem Setup screen.
Highlight the box beside Baud Rate and press the
button. A list of baud rates ranging from 300
to 115,200 appears.
Highlight the box beside Data Bit and press the
button. This toggles between 7 bit and 8 bit
formats.
Highlight the box beside Stop Bit and press the
button. This toggles between 1 and 2 Stop Bits.
Highlight the box beside Parity and press the
button. A drop-down list appears. You can select
from None, Odd or Even parity.
You can save your changes by highlighting OK and pressing the
button. Selecting Cancel exits
the screen without saving the changes.
NOTE: If the RS-232C port is in use for Remote Control, Text-In or PTZ, networking cannot be
configured for a modem.
50
Advertisement
Table of Contents
