System Menu; Com/Lan; Rs-232C Setting; Rs-485 Setting - Mitsubishi Electric DX-TL4516E Installer Manual

COM/LAN

This menu is used to set the communication settings between
this unit and the external device connected.

RS-232C Setting

This item is used to remotely control this unit via a PC
connected to the RS-232C terminal.

System Menu

1 COM/LAN
1 RS-232C Setting
1. Select the communication mode.
step
Remote A: Controls this unit via a PC and this unit
returns every status information.
Remote B: Controls this unit via a PC and this unit
returns only the response to the command code.
Remote C: Controls this unit via a PC and this unit
returns nothing.
Off: Does not control this unit via a PC.
2. Set the port settings shown below.
step
• Transmission mode
• Data bit length
• Parity bit
• Stop bit length
• Delimiter
Set all the settings to the same values as the PC
connected.
70

RS-485 Setting

This item is used to make the settings to use this unit with
optional keyboard connected to RS-485 terminal.
System Menu
1 COM/LAN
2 RS-485 Setting
1. Select the recorder address.
step
Standalone: Does not use the optional keyboard
with this unit.
Slave ID:01 to 16: Sets the ID number of this unit
when using with optional keyboard.
System Menu