Config Screen; Clip Copy; Figure 73 - Config Screen - Mitsubishi Electric DX-TL4E User Manual

4-channel digital video recorder
Table of Contents

Advertisement

Four-Channel Digital Video Recorder
NOTE: The Admin and User passwords are composed of up to eight digits using the camera
buttons. The default Admin password is 4321.
CAUTION: Write down the new password and save it in a secure place. If the
password is forgotten, the unit must be reset using the Factory Reset Button and
all data settings will be lost.
To lock the buttons on the front panel or remote control, highlight Key-Lock On and press the
button. Once the buttons are locked, pressing any button on the front panel or remote control will
cause a password screen to display. You will need to enter the correct password to unlock the keys.
The Key Lock password is 4321. The Administrator password also can be used to unlock the keys.
You can save your changes by highlighting OK and pressing
button . Selecting Cancel exits the
screen without saving the changes.

Config Screen

The Config menu is used to perform functions such as switching between Quick Setup and Normal
Setup, backing up video, loading default setup and clearing all data.
Figure 73 — Config screen.

Clip Copy

The Clip Copy screen can be used to back up video to an external USB hard disk drive, USB
CD-RW drive or USB flash drive. The backup clip images can be viewed on computers running
Microsoft Windows 98, ME, 2000 or XP. Refer to the Appendix A — USB Hard Disk Drive
Preparation for information on preparing the external drive for back up.
55

Advertisement

Table of Contents
loading

Table of Contents