Alarm In Setup Screen; Figure 34 - Ptz Device List; Figure 35 - Alarm In Setup Screen - Mitsubishi Electric DX-TL4E User Manual

4-channel digital video recorder

Table of Contents

User's Manual

You can assign titles to each camera by highlighting the Title heading and pressing the

button.

A virtual keyboard allows you to enter camera names.

Selecting the PTZ Device box causes a list of controllable cameras to display. Select your camera

from the list and press the

button. You will need to connect the camera to the RS-232C terminal

on the back of the DVR following the camera manufacturer's instructions.

Figure 34 — PTZ Device list.

NOTE: When selecting the PTZ device you wish to control by selecting it from the menu, the

displays on the PTZ camera screen.

You can assign IDs to each camera by highlighting the ID heading and pressing the

button.

Change the number by highlighting it and using the arrow buttons to increase and decrease the

number. The PTZ ID number can be set from 0 to 256.

Alarm In Setup Screen

Highlight Alarm In in the Main menu and press the

button. The Alarm In setup screen appears.

Figure 35 — Alarm In setup screen.

Table of Contents