System Log Screen; System Shutdown; Figure 31 - System Log Screen - Mitsubishi Electric DX-TL4E User Manual

4-channel digital video recorder

Table of Contents

User's Manual

Highlight the box beside Check Time and press the

button. Adjust the numbers using arrow

buttons.

Highlight the box beside Temperature Threshold and press the

button. Adjust the numbers

using arrow buttons.

Highlight the box beside Sensor Unit and press the

button to toggle between Celsius or

Fahrenheit.

If you want to check the storage status instantly, highlight Check Now and press the

button.

You can save your changes by highlighting OK and pressing the

button. Selecting Cancel exits

the screen without saving the changes.

System Log Screen

Highlight System Log in the Main menu and press the

button. The System Log screen

appears.

Figure 31 — System Log screen.

The System Log screen displays a record of various events logged by the DVR. The list shows the

dates and times the system was turned ON and OFF, system was restarted, recording was started or

stopped, playback was started or stopped, setup changes were made, and data banks were cleared.

The events are listed from the most recent to the oldest. You can scroll through the list a page at a

time by selecting the Up and Down arrow buttons and pressing the

button. You can go directly

to an event number by highlighting the event number box (left of the UP arrow), pressing the

button, using the arrow buttons to change the number, and pressing the

button.

Highlight System Shutdown in the Main menu and press the

button. This shuts the DVR

down. When shutting down the DVR, you need to confirm that you want to shut down the unit, and

you will be asked for an administrator password.

Table of Contents