Network Configuration Lan B; Default Ip Settings - Mitsubishi Electric DX-TL4509E Quick Start Manual

Network Configuration LAN B

The LAN B connection is used to network the
DVR for remote access via the inbuilt Web Server
or PC55 and PC200 software from a remote PC.

Default IP settings

IP address
Sub Net Mask
To change the settings enter the System Menu:
Press the SET UP Button on the front of the DVR
From the User Menu screen (000 000 000), press the D
NEXT button twice to display the
SYSTEMS MENU (300 000 000).
(300 000 000) Press 1
LAN B Settings
(313 000 000)
192.168.000.100
255.255.255.000
COM/LAN
Rear Network connections of DX-TL5000
Press 3
LAN B Settings – This is the setting used to setup the
communication protocol between the DVR and your network.
1. Enter the STATIC IP Address, Sub Net Mask
and Gateway of the DVR. Work with the IT
Administrator, in charge of the network to get
this information.
2. Service Ports – Leave at factory settings
unless IT person wants to make changes to
default settings.
3. E-Mail Address (Up to 5) Information – Use
the application software PC55 or PC200 to
make needed changes.
4. IP Alarm Notification Information – Same as
above.
33
LAN B (Communication) Setting