Storage Screen; Figure 28 - System Check (Alarm Out / Notify) Screen; Figure 29 - Storage Screen - Mitsubishi Electric DX-TL4E User Manual

4-channel digital video recorder

Table of Contents

User's Manual

Figure 28 — System Check (Alarm Out / Notify) screen.

Highlight the box under the Alarm Out heading and press the

button. A drop menu displays

available alarm outputs for the recording problem. Highlight the desired alarm output from the

external alarm out terminal or internal buzzer, and press the

button.

NOTE: Alarm Out cannot be set to Check Point – System.

Highlight the box under Notify and press the

button. This toggles between On and Off. When it

is On, the DVR notifies the remote site of its System (Good) and Record (Bad).

Storage Screen

Highlight Storage in the Main menu and press the

button. The Storage setup screen appears.

Figure 29 — Storage screen.

The Type field displays the type and capacity of storage device.

The Status field displays the device status or fault conditions. (Good, Disk Bad, S.M.A.R.T.

Alert, High Temperature, or Not installed)

Table of Contents