General Operation - Kenwood KIV-700 Instruction Manual

General Operation

Exit of the Demonstration Mode
Turn off the demonstration mode when you use it
for the first time after installation.
1
Press the [Volume] knob to quit the
demonstration mode when the message "To
Cancel DEMO Press the volume knob" is displayed
(approx. 15 seconds).
2
Turn the [Volume] knob to select "YES" and then
press the [Volume] knob.
Power and Source Select
Turns the power ON by pressing the [SRC]
button.
When the power is ON, select a source.
• SRC Select mode 1: Press the [SRC] button and
then turn the [Volume] knob. To determine the
selected source, press the [Volume] knob.
• SRC Select mode 2: Pressing the [SRC] button
each time switches between sources.
Tuner ("TUNER")
➜
"iPod") Internal Memory ("Int.Mem. " )
➜
Auxiliary input ("AUX")
Keeping pressing the [SRC] button for at least 1
second turns the power OFF.
⁄
• The SRC Select mode can be set in "Source Select" of
Settings> (page 37).
• Auxiliary input source is initially set to "OFF". Set "Built in
AUX" described in <Initial Settings> (page 37)
• When an optional accessory is connected, the source name
for each device appears.
• When connection of the iPod is recognized, the source
display changes from "USB" to "iPod".
• This unit automatically turns full power OFF after 20
minutes lapses in Standby mode in order to save the
vehicle's battery. The time until full power OFF can be set in
"Power OFF Wait" of <Initial Settings> (page
• Internal Memory source cannot be selected when "AV Out
Set" described in <Initial Settings> (page 37)
Volume
Turning the [Volume] knob adjusts the sound
volume.
USB or iPod ("USB" or
➜
Standby ("STANDBY")
➜
<Initial
to "ON".
37).
is set to "ON".
Autogood products Internet store "130"
Menu List Operation
The basic operating procedure for using this
function is described below. The individual function
items are covered in the operating procedures.
1
Select the source
Press the [SRC] button. Turn the [Volume] knob
and press it when the desired item is displayed.
Function items vary from source to source. For a list
of the function items, refer to
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly also switches source.
2
Enter Menu List mode
Press the [MENU] button.
3
Select the setting item
Turn the [Volume] knob and press it when the
desired item is displayed.
Repeat the operation until your desired setup item
is selected.
✍ Press the [MENU] button to return to the
previous item.
Operation example:
3
2
Music
2
Playlists
My
1 1
Artists
Albums
Videos
Play Mode
In this manual, the above selection is indicated as
>
Select "Music" "Playlists"
4
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
5
Exit Menu Setting mode
Press the [MENU] button for at least 1 second to
return to the first hierarchy.
Press the [MENU] button in the first hierarchy to
exit the Menu List mode.
<Menu List> (page 62).
4
[Volume]
[Volume]
1 2
3
[MENU]
[MENU]
3 4
1 sec.
>
"My Best 25".
|
English
5