Kenwood KIV-BT900 Instruction Manual

Kenwood KIV-BT900 Instruction Manual

Digital media receiver
Hide thumbs Also See for KIV-BT900:
Table of Contents

Advertisement

DIGITAL MEDIA RECEIVER
KIV-BT900
KIV-700

INSTRUCTION MANUAL

Before reading this manual, click the button below to check the latest edition
and the modified pages.
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new Digital Media-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KIV-BT900/ KIV-700 Serial number
US Residents Only
Register your Kenwood product at www.Kenwoodusa.com
© 10ORD_IM316_Ref_en_01_K
Check the latest edition
Register Online

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood KIV-BT900

  • Page 1: Instruction Manual

    Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KIV-BT900/ KIV-700 Serial number...
  • Page 2: Table Of Contents

    Appendix About Audio file About Video files About Picture files iPod/iPhone that can be connected to this unit About USB device About “KENWOOD Music Editor” About the Cell-Phone About Satellite Radio tuner (Optional) About HD Radio Reception (Optional) Menu List...
  • Page 3: Before Use

    • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • Characters that conform to ISO 8859-1 can be displayed.
  • Page 4: Component Names And Functions

    See <Menu List Operation> (page 5) details. KIV-BT900 : To display Play mode in the Menu List (press the knob at least 1 second). KIV-700 : To make a voice dialing call (press the knob at least 1 second). * Dialing Call>...
  • Page 5: General Operation

    General Operation Exit of the Demonstration Mode Turn off the demonstration mode when you use it for the first time after installation. Press the [Volume] knob to quit the demonstration mode when the message “To Cancel DEMO Press the volume knob” is displayed (approx.
  • Page 6: Ipod/Iphone Operation

    2. Turn the [Volume] knob and press it when the desired item is displayed. Select “Port Up”. Repeat these steps to switch to the device to be connected. KIV-BT900/ KIV-700 SEARCH MODE iPod VIDEO OUT ⁄ • For more details on USB HUB, see (page 67).
  • Page 7: Selecting A Song By Browsing Ipod

    Selecting a Song by Browsing iPod Display Items “Music” “Playlists” Playlists “Artists” Artists “Albums” Albums “Songs” Songs “Podcasts” Podcasts “Genres” Genres “Composers” Composers “Audiobooks” Audio books “Videos”* “Video Playlists” Video Playlists “Movies” Movies “Music Videos” Music Videos “TV Shows” TV Shows “Video Podcasts”...
  • Page 8: Play Mode

    You can select a Play Mode, such as Random play and Repeat play. Select iPod source Enter Play Mode in the Menu List KIV-BT900: Press the [Volume] knob for at least 1 second. KIV-700: Press the [PLAY MODE] button. ✍ You can also select from “Play Mode” in Menu List mode.
  • Page 9: Ipod Setting

    iPod Setting You can select following iPod Setting items. Select iPod source Enter Menu List mode Press the [MENU] button. Turn the [Volume] knob and press it when the desired item is displayed. Select “Settings”. Select the setting item Turn the [Volume] knob and press it when the desired item is displayed.
  • Page 10: Direct Search

    <Selecting a Song by Browsing iPod> (page 7) select a song. Cancelling the Direct Search Press the [SEARCH MODE] button. KIV-BT900/ KIV-700 ⁄ • Characters that can be entered are alphabetical characters (A to Z), numerical characters (0 to 9), and “ * ”.
  • Page 11: Alphabet Search

    Alphabet Search You can select a song by alphabet. This function searches songs whose name contain the specified character(s) in the list of the selected Search item (artist, album, etc). Select iPod source Enter browsing mode Press the [MENU] button. Turn the [Volume] knob and press it when the desired item is displayed.
  • Page 12: My Playlist

    1 second or longer at the end. • Random play cannot be performed during playback of a song in the Playlist. KIV-BT900/ KIV-700 Deleting a Song from the Playlist Press the [SEARCH MODE] button. Enter Delete Playlist mode Turn the [Volume] knob and press it when the desired item is displayed.
  • Page 13 English...
  • Page 14: Usb Device/ Zune/ Internal Memory Operation

    2. Turn the [Volume] knob and press it when the desired item is displayed. Select “Port Up”. Repeat these steps to switch to the device to be connected. KIV-BT900/ KIV-700 SEARCH MODE Multi card reader Drive Search Selecting the device inserted in the Multi Card Reader.
  • Page 15: File Search

    File Search Selecting the file you want to listen to from the device being played now. USB device/ Internal memory source Display Items “USB List”/ Folder or file name list. “Internal Memory List” Music Editor media Display Items “Music” “Playlists” Playlists “Artists”...
  • Page 16: Skip Search

    You can select a Play Mode, such as Random play and Repeat play. Select USB/ Zune/ Internal memory source Enter Play Mode in the Menu List KIV-BT900: Press the [Volume] knob for at least 1 second. KIV-700: Press the [PLAY MODE] button.
  • Page 17: Direct Music Search

    “Device F/W Updates the firmware. The update information Update” will be posted on the following URL as necessary. www.kenwood.com/cs/ce/ Selectable when Music Editor media or Zune is used. Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly.
  • Page 18: Copying From Usb Device

    2. Turn the [Volume] knob and press it when the desired item is displayed. Select “YES”. Exit Copy mode Turn the [Volume] knob and press it when the KIV-BT900/ KIV-700 desired item is displayed. Select “EXIT”. Returns to step 3 if “NEXT” is selected.
  • Page 19: Deleting Files In Memory

    Function of Internal memory source Deleting Files in Memory Deleting Files in Memory. Display Items “Settings” “Internal Memory Delete a folder or file. Delete” “Internal Memory Perform format to delete all files stored in Format” internal memory. Internal Memory Format Select Internal memory source Press the [SRC] button.
  • Page 20: Picture File Viewing

    • If picture files are started to play while playing a video file, the video play stops. • The Slide show is displayed only when you have applied the parking brake. KIV-BT900/ KIV-700 Function of USB or Internal memory source Wallpaper Downloading You can use downloaded picture for the display of this unit.
  • Page 21 English...
  • Page 22: Disc Changer Control (Optional)

    You can select a Play Mode, such as Random play and Repeat play. Select CD changer source Enter Play Mode in the Menu List KIV-BT900: Press the [Volume] knob for at least KIV-700: ✍ You can also select from “Play Mode” in Menu List mode.
  • Page 23: Direct Music Search

    Function of remote control Direct Music Search Searching the music by entering the track number. Enter Direct Music Search mode Press the [DIRECT] button on the remote control. Enter the music number Press the number buttons on the remote control. Search the music Press the [4] or [¢] button.
  • Page 24: Tuner Operation

    1 Station information (see <Customization of Display> (page 36)) 2 Status indicator (see <Display Indicator items> (page 71)) KIV-BT900/ KIV-700 Tuner Setting SEARCH MODE You can select following Tuner Setting items. Select Tuner source Enter Menu List mode Press the [MENU] button.
  • Page 25: Station Preset Memory

    “Traffic INFO” is displayed and traffic information is received. If the volume is adjusted during reception of traffic information, the adjusted volume is memorized automatically. The memorized volume will be applied next time the Traffic Information function is turned ON. Station Preset Memory Putting a station in the memory.
  • Page 26: Direct Access Tuning

    Press the [4] or [¢] button. Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control. KIV-BT900/ KIV-700 iTunes Tagging Using an iTunes Tagging enabled RDS station receiver you can tag your music. When you hear a song you enjoy on your local RDS station, you only have to press the [SEARCH MODE] button.
  • Page 27: Pty (Program Type)

    PTY (Program Type) Selecting the Program Type below and searching for a station. Program Type Display Program Type Display Speech “Speech” Soft Music “Music” Nostalgia News “News” Jazz Information “Inform” Classical Sports “Sports” R & B Talk “Talk” Soft R & B Rock “Rock”...
  • Page 28: Bluetooth Audio Operation

    • For details on the Bluetooth Audio player which can be connected, see <About the Bluetooth Audio player> in the instruction manual of the Bluetooth Unit. KIV-BT900/ KIV-700 Basic Operation Selecting Bluetooth Audio source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed.
  • Page 29 English...
  • Page 30: Kiv-Bt900/ Kiv

    Press the [SRC] button. Start registering this unit by operating the Bluetooth device By operating the Bluetooth device, register the hands-free unit (pairing). Select “KENWOOD BT USB/R-3P1”/ “KCA-BT300”/ “KCA-BT200” from the list of connected units. Enter a PIN code Input the PIN code (“0000”) in the Bluetooth device.
  • Page 31: Other Functions

    Call Press the [Volume] knob. Each pressing of this knob switches the calling party. Other Functions Clearing the Disconnection Message KIV-BT900: Press the [ ] button. KIV-700: Press the [PLAY MODE] button for at least 1 second. “HF Disconnect” disappears.
  • Page 32: Dial A Number

    ✍ To erase the entered phone number digit by digit: Press the [4] button on the remote controller. Make a call • Press the [Volume] knob. • Press the [DIRECT] button on the remote controller. ⁄ • You can input max 25 (KIV-BT900)/ 32 (KIV-700) digits.
  • Page 33: Make A Voice Dialing Call

    Make a Voice Dialing Call Enter voice recognition mode KIV-BT900: Press the [ ] button for at least 1 second. KIV-700: Press the [VOL] button for at least 1 second. “Phonebook Name?” is displayed. When a beep is heard, say the name within 2 seconds.
  • Page 34: Display Settings

    > Select “Settings” “Display & Illumination”. Select the setting item to adjust Turn the [Volume] knob and press it when the desired item is displayed. KIV-BT900/ KIV-700 Display Overview “Settings” “Display & Making Display and Illumination settings. Illumination”...
  • Page 35 Illumination Color Selection Selecting the Illumination Color of the panel. Enter Menu List mode Press the [MENU] button. Enter Illumination color selection mode Turn the [Volume] knob and press it when the desired item is displayed. > Select “Settings” “Display & Illumination” “Key Color Select”.
  • Page 36: Text Display Selection

    [Volume] knob. Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. KIV-BT900/ KIV-700 Text Display Selection In FM Tuner source Frequency & Program Service name (“Frequency/PS”) Song title* (“Song Title”)
  • Page 37: Auxiliary Input Display Setting

    In SIRIUS source (Optional) Channel Name (“Channel Name”) Band & Channel Number (“Channel Number”) Song Title (“Song Title”) Date (“Date”) Artist name (“Artist Name”) Spectrum analyzer (“Speana”) Composer name (“Composer Name”) Blank (“Blank”) Category Name (“Category Name”) In XM source (Optional) Channel Name (“CHANNEL Band &...
  • Page 38: Clock And Other Functions

    2. Turn the [Volume] knob to select a setting value, and then press the [Volume] knob. 3. Press the [MENU] button. KIV-BT900/ KIV-700 Select Summer Time Turn the [Volume] knob and press it when the desired item is displayed.
  • Page 39: Demonstration Mode Setting

    “System F/W Updates the firmware. The update information Update” will be posted on the following URL as necessary. www.kenwood.com/cs/ce/ Make a setting Turn the [Volume] knob to select a setting value, and then press the [Volume] knob. Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly.
  • Page 40: Audio Adjustments

    - X’Over Setting (page “Volume Offset” Sets each source’s volume as a difference from the basic volume. “–8” — “0” (AUX: “-8”— “+8”) KIV-BT900/ KIV-700 “2Zone Select” “2Zone Front/Rear” “Preset” Select the source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed.
  • Page 41: Preset Equalizer Curve Select

    Preset Equalizer Curve Select You can select following Equalizer curve. Display Equalizer curve “Natural” Natural “User” User* “Rock” Rock “Pops” Pops “Easy” Easy “Top40” Top 40 “Jazz” Jazz “Game” Game “iPod” iPod (During iPod source only) * The Equalizer curve set in the section <Manual Equalizer Control>...
  • Page 42: Listening Position Selection

    Turn the [Volume] knob to select a setting value, and then press the [Volume] knob. Exit Audio Control mode Press the [MENU] button for at least 1 second. KIV-BT900/ KIV-700 Listening Position Fine Adjustments Making fine adjustment of the value specified at Preset position selection per speaker.
  • Page 43: Dual Zone System

    Dual Zone System The separate sources can be selected for Front channel and Rear channel. Display Overview “2Zone Rear Volume”* Adjust the volume of Rear channel. “0” — “35” “Detailed Setup” “2Zone Select” The Dual Zone System is enabled by selecting a sub source.
  • Page 44: Dsp Setup

    ⁄ • You can compensate the distances in more details by using <Car Type Fine Adjustments> (page 45) KIV-BT900/ KIV-700 Speaker Setting The speaker X’Over is automatically set when the position and size of each speaker are selected from the following items.
  • Page 45 Car Type Fine Adjustments Adjusting fine tuning of the speaker position compensation value specified at Selection> (page 44). Display Item “Front” Front speaker “Rear” Rear speaker “SW” Subwoofer Enter Audio Control mode Press the [Volume] knob. Enter Car Type Adjustment mode Turn the [Volume] knob and press it when the desired item is displayed.
  • Page 46: X'over Setting

    [Volume] knob. Repeat steps 3 to 5 to complete the X’Over settings Exit Audio Control mode Press the [MENU] button for at least 1 second. KIV-BT900/ KIV-700 Audio Preset Memory Registering the value setup by Sound Control. Setup Sound Control 44).
  • Page 47: Audio Preset Recall

    Audio Preset Recall Recalling the sound setup registered by Preset Memory> (page 46). Select the source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. ✍ SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source.
  • Page 48: Favorite Control

    • Register 6 of Favorite Preset Memory. The memory cannot be erased by the Reset button. KIV-BT900/ KIV-700 • If the contents in iPod are changed after the FAVORITE registration, the list registered in this unit becomes different from that in iPod.
  • Page 49: Favorite Preset Memory Delete

    Favorite Preset Memory Delete Deleting an item registered to Favorite. Select the Standby Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select the “STANDBY” display. ✍ SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source.
  • Page 50: Bluetooth Setup

    “Noise Reduction”* “Echo Cancel Level”* Function of KIV-700 with KCA-BT300/BT200 (Optional Accessory) Function of KIV-BT900/ KIV-700 with KCA-BT300 (Optional Accessory) 56). Make a setting Turn the [Volume] knob to select a setting value, and then press the [Volume] knob. Exit BT Setting mode 52).
  • Page 51: Registering Bluetooth Device

    (pairing). You can register up to 5 Bluetooth devices to this unit. Registering from this unit Enter Bluetooth mode KIV-BT900: Press the [ ] button. KIV-700: Press the [PLAY MODE] button for at least 1 second.
  • Page 52: Registering Pin Code

    Bluetooth Setup Registering PIN Code By operating the Bluetooth device, specify the PIN code necessary for registering this unit. Enter Bluetooth mode KIV-BT900: Press the [ ] button. KIV-700: Press the [PLAY MODE] button for at least 1 second. Enter PIN code edit mode Turn the [Volume] knob and press it when the desired item is displayed.
  • Page 53: Device

    ⁄ • Up to 1000 phone numbers can be registered for each registered cell-phone. • Up to 25 (KIV-BT900)/ 32 (KIV-700) digits can be registered for each phone number along with up to 50* characters representing a name. (* 50: Number of alphabetical characters. Fewer characters can be input depending on the type of characters.)
  • Page 54: Adding A Voice Dialing Command

    Adding a Voice Dialing Command Add a voice tag to the phone book for voice dialing. You can register up to 35 voice tags. Enter Bluetooth mode KIV-BT900: Press the [ ] button. KIV-700: Press the [PLAY MODE] button for at least 1 second.
  • Page 55: Category

    Setting a Voice Command for Category Add a voice tag to the phone number category (type) for voice calling. Enter Bluetooth mode KIV-BT900: Press the [ ] button. KIV-700: Press the [PLAY MODE] button for at least 1 second. Enter Phone Number type edit mode Turn the [Volume] knob and press it when the desired item is displayed.
  • Page 56: Sms (Short Message Service)

    Downloading the SMS Download the short message (SMS) arrived at the cell-phone so that it can be read on this unit. Enter Bluetooth mode KIV-BT900: Press the [ ] button. KIV-700: Press the [PLAY MODE] button for at least 1 second.
  • Page 57 English...
  • Page 58: Satellite Radio Tuner Control

    Selects the Information or Clock. Display example of information display mode 1 Station information (see <Customization of Display> (page 36)) KIV-BT900/ KIV-700 Satellite Radio Setting You can select following Satellite Radio Setting items. Select Satellite Radio source Enter Menu List mode Press the [MENU] button.
  • Page 59: Preset Memory

    Cancelling Category and Channel Search mode Press the [MENU] button for at least 1 second, and then press it again briefly. ⁄ • You cannot Channel search until the category information is acquired. Preset Memory Putting the channel in the memory. Select the channel you wish to store in the preset memory Enter Menu List mode...
  • Page 60: Hd Radio™ Tuner Control

    <Customization of Display> (page 36)) 2 Status indicator (see <Display Indicator items> (page 71)) KIV-BT900/ KIV-700 Station Preset Memory SEARCH MODE Putting a station in the memory. Select the radio band and tune in a desired radio station you wish to store in the preset...
  • Page 61: Hd Radio™ Setting

    Preset Tuning Recalling the stations in the memory. Select the radio band Enter Menu List mode Press the [MENU] button. Select a desired station in the memory Turn the [Volume] knob and press it when the desired item is displayed. >...
  • Page 62: Direct Access Tuning

    ⁄ • You can enter the FM band frequency in steps of a minimum of 0.1 MHz. KIV-BT900/ KIV-700 Function of KTC-HR300 (optional accessory) iTunes Tagging Using an iTunes Tagging enabled HD Radio receiver you can tag your music. When you hear a song you enjoy on your local HD Radio station, you only have to press the [SEARCH MODE] button.
  • Page 63 English...
  • Page 64: Basic Operations Of Remote

    • Exit from mode: [EXIT] • Selection of item: [5]/[∞] • Determination: [ENT] • Enter Audio Control mode: [AUD] KIV-BT900/ KIV-700 In Tuner/HD Radio source • Band select: [FM+]/[AM–] • Station select: [4]/[¢] • Recall preset stations: [1] — [6]...
  • Page 65: Hands-Free Phone Control

    Hands-free phone control Making a call • Enter the dialing method selection mode: [ ] • Select a dialing method: [ENT] • Number dial input: Input a digit: [0] – [9] Input “+”: [¢] Input “#”: [FM+] Input “*”: [AM–] Clear the entered phone number: [4] •...
  • Page 66: About Audio File

    In this case, “RESUMING” is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. • You cannot operate iPod if “KENWOOD” or “✓” displayed on iPod.
  • Page 67: About Usb Device

    KENWOOD Music Editor. • “KENWOOD Music Editor Lite ver1.0” is available from the following web site: www.kenwood.com/cs/ce/ • For further information on “KENWOOD Music Editor Lite ver1.0”, refer to the site above or the application...
  • Page 68: Menu List

    “Initial Settings” “Source Select” “Beep” “Menu Language Select” “Built in AUX” “Favorite Delete” “Built in AMP” “AV Out Set” “System F/W Update” KIV-BT900/ KIV-700 Function items appearing when the iPod source is selected Display Page “Music” – “Playlists” “Artists” “Albums”...
  • Page 69 Function items appearing when the USB source is selected Display “USB List” “Copy from USB” “Play Mode” “File Scan” “Folder Random” “All Random” “File Repeat” “Folder Repeat” “Port Up” “Drive Select” “Slide” “Save as Wallpaper” “Settings” “Device F/W Version” “Device F/W Update” “Clock &...
  • Page 70 Function items appearing when an AUX source is selected Display “Settings” “Name Set” “Clock & Date” “Display & Illumination” “RDS Setting” KIV-BT900/ KIV-700 Function items appearing when the Hands-Free source is selected Page Display “Preset Call” “Phonebook” “In Call” “Out Call”...
  • Page 71: Display Indicator Items

    Function items appearing when the Satellite Radio tuner source is selected Display “List & Memory” “SR1”/ “XM1” “SR2”/ “XM2” “SR3”/ “XM3” “SR4”/ “XM4” “Channel Search” “Channel Scan” “Settings” “Seek Mode” “ESN” “Clock & Date” “Display & Illumination” “RDS Setting” Function items appearing when the HD Radio™ tuner source is selected Display “List &...
  • Page 72 Cape Verde Is. Caracas Chicago Copenhagen Denver Detroit Dhaka Ekaterinburg Harare Helsinki Hong Kong Islamabad Istanbul Jakarta Jerusalem Johannesburg Kabul KIV-BT900/ KIV-700 Continent City Kansas City Time Difference Kathmandu –10:00 Kingston –9:00 Krasnoyarsk –8:00 Kuala Lumpur –7:00 Kuwait –7:00 Kyiv –6:00 Las Vegas –5:00...
  • Page 73 English...
  • Page 74 • The “AAC” logo is a trademark of Dolby Laboratories. • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners.
  • Page 75: Accessories/ Installation Procedure

    Accessories/ Installation Procedure Accessories ...1 ...2 ...1 * KIV-BT900 only ...1 2.5 m Installation Procedure To prevent a short circuit, remove the key from the ignition and disconnect the - battery. Make the proper input and output wire connections for each unit.
  • Page 76: Connecting Wires To Terminals

    CONT amplifier of the film-type or short pole type antenna. To connect the Kenwood navigation system, consult your navigation MUTE manual. Connect to the terminal that is grounded when either the telephone ⁄...
  • Page 77: Installation/Removing The

    Installation/Removing the Unit Non-Japanese Cars Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
  • Page 78: Installation The Microphone Unit

    Installation/Removing the Unit Accessory of KIV-BT900 Installation the Microphone Unit Check the installation position of the microphone (accessory 7). Remove oil and other dirt from the installation surface. Install the microphone. Wire the microphone cable up to the hands-free box with it secured at several positions using tape or the like.
  • Page 79: Troubleshooting Guide

    Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. • Cannot set up the subwoofer. • No output from the subwoofer. • Cannot set up the subwoofer position of Manual position setting. •...
  • Page 80  Another Bluetooth device or profile is used for communication.  The downloading of the Phone book or the SMS disconnects the sound. KIV-BT900/ KIV-700 The messages shown below display your systems condition. TOC Error: • No disc has been loaded in the disc •...
  • Page 81 If this error is still displayed, consult a local Kenwood dealer.  Try all over again from the start. If this error is still displayed, consult a local Kenwood dealer. Writing Error: Writing failed while the file was downloaded.
  • Page 82: Specifications

    AM tuner section Frequency range (10 kHz space) : 530 kHz – 1700 kHz Usable sensitivity (S/N = 20dB) : 28 dBµ (25 µV) Bluetooth section (KIV-BT900) Version : Bluetooth Ver. 2.0 Certified Frequency range : 2.402 – 2.480 GHz...
  • Page 83: Auxiliary Input

    : 1200 mV Input Impedance : 10 kΩ General Operating voltage KIV-BT900 (10.5 – 16V allowable) : 14.4 V KIV-700 (11 – 16V allowable) : 14.4 V Maximum Current consumption : 10 A Installation Size (W x H x D)
  • Page 84 This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful influence on the environment.

This manual is also suitable for:

Kiv-700

Table of Contents