Setting A Voice Command For Category - Kenwood KIV-700 Instruction Manual

Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1
Enter Bluetooth mode
Press the [TI] button for at least 1 second.
2
Enter Phone Number type edit mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select "BT Settings"
"Phonebook Type Edit".
3
Select the category (type) you wish to set
Turn the [Volume] knob and press it when the
desired item is displayed.
Select "General", "Home", "Office", "Mobile", or
"Other".
4
Select a mode
Turn the [Volume] knob.
Display
"Phonebook Type Registration"
"Phonebook Type Check"*
"Phonebook Type Delete"*
* Displayed only when a name for which a voice tag has
been registered is selected.
5
Register the category (type) by performing
steps 5 to 7 in <Adding a Voice Dialing
Command> (page 54).
6
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
⁄
• Set the voice tag for all the 5 categories. If the voice tag
is not registered for all the categories, the Phone book
may not be recalled by voice command.
> "Voice Tag" >
Operation
Register a voice tag.
Play a voice tag.
Delete a voice tag.
Autogood products Internet store "130"
55
|
English