Station Preset Memory - Kenwood KIV-700 Instruction Manual

"RDS Regional" Sets whether to switch to the station only in the
specific region using the "AF" control.
"ON"/ "OFF"
"Auto TP Seek" When traffic information station reception is
poor, automatically searches for a station that
can be received better.
"ON"/ "OFF"
5
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Remarks
• News (News Bulletin with Timeout Setting)
Automatically receives news bulletin when it starts. Set
the time during which interrupt is to be disabled after
start of another news bulletin. Changing "News 00min"
to "News 90min" turns this function ON. If news bulletin
starts when this function is ON, "News" is displayed and
news is received. If "20min" is has been set, reception of
another news bulletin will not start for 20 minutes. The
news bulletin volume is the same level that was set for
Traffic Information.
• Forced MONO
Strong electrical fields (such as from power lines) may
cause unstable sound quality when it is set to ON. In such
a situation, turn it OFF.
( : Factory setting)
Autogood products Internet store "130"

Station Preset Memory

Putting a station in the memory.
1
Select the radio band and tune in a desired
radio station you wish to store in the preset
memory
2
Enter Menu List mode
Press the [MENU] button.
3
Enter Preset Memory mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select "List & Memory".
4
Select the number to put in the memory
Turn the [Volume] knob and press it for at least
2 seconds when the desired item is displayed.
Select the preset number.
Display Overview
"List & Memory"
"-1" Preset number 1.
"-2" Preset number 2.
"-6" Preset number 6.
23
|
English