Registering Pin Code; Selecting The Bluetooth Device You; Wish To Connect - Kenwood KIV-700 Instruction Manual

Bluetooth Setup (Optional)

Registering PIN Code

By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Enter Bluetooth mode
Press the [TI] button for at least 1 second.
2
Enter PIN code edit mode
Turn the [Volume] knob and press it when the
desired item is displayed.
>
Select "BT Settings"
Code Edit".
The current setting of PIN code is displayed.
3
Input the PIN code
1. Turn the [Volume] knob and press it when
the desired item is displayed.
Select the digit.
2. Turn the [Volume] knob to select the
numbers, and then press the [Volume] knob.
4
Register a PIN code
Press the [Volume] knob for at least 1 second.
If "Completed" is displayed, registration is
completed.
5
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
⁄
• By default, "0000" is specified.
• A PIN code can be specified with up to eight digits.
52
|
KIV-700
>
"Detailed Setup" "PIN
Autogood products Internet store "130"

Selecting the Bluetooth Device You

Wish to Connect

When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1
Enter Bluetooth mode
Press the [TI] button for at least 1 second.
2
Select Bluetooth device selection mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Cell-phone
>
Select "BT Settings"
Audio player
>
Select "BT Settings"
"(name)" is displayed.
3
Select the Bluetooth device
Turn the [Volume] knob.
4
Set up the Bluetooth device
Press the [Volume] knob.
" (name)" or " (name)" is displayed.
" " (blue): The selected Bluetooth device is busy.
" " (gray): The selected Bluetooth device is on
standby.
" " (blank): The Bluetooth device is deselected.
5
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
⁄
• If a Bluetooth device is already selected, deselect it, and
then select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.
"Phone Selection".
"Audio Selection".