General Operation; Exit Of The Demonstration Mode; Power And Source Select; Volume - Kenwood KIV-BT901 Instruction Manual

General Operation

Exit of the Demonstration Mode

Turn off the demonstration mode when you use it
for the first time after installation.
1
Press the [Volume] knob to quit the
demonstration mode when the message "To
Cancel DEMO Press the volume knob" is displayed
(approx. 15 seconds).
2
Turn the [Volume] knob to select "YES" and then
press the [Volume] knob.

Power and Source Select

Turns the power ON by pressing the [SRC]
button.
When the power is ON, select a source.
• SRC Select mode 1: Pressing the [SRC] button
each time switches between sources.
Tuner (" TUNER" or "
(" USB"), iPod (" iPod") or Zune (" Zune")
Pandora (" Pandora")
➜
(" Int.Mem. " ) Auxiliary Input ("
➜
Standby (" STANDBY")
• SRC Select mode 2: Press the [SRC] button and
then turn the [Volume] knob. To determine the
selected source, press the [Volume] knob.
Keeping pressing the [SRC] button for at least 1
second turns the power OFF.
⁄
• The SRC Select mode can be set in "Source Select" of
Settings> (page 43).
• Auxiliary input source is initially set to "OFF". Set "Built in
AUX" described in <Initial Settings> (page 43)
• To use the Pandora source, set "Pandora Source" in
Settings> (page 43) to "ON".
• When an optional accessory is connected, the source name
for each device appears.
• When connection of the iPod or Zune is recognized, the
source display changes from "USB" to "iPod", "Zune".

Volume

Turning the [Volume] knob adjusts the sound
volume.
HD RADIO") USB
➜
Internal Memory
➜
AUX")
➜
<Initial
to "ON".
<Initial

Menu List Operation

The basic operating procedure for using this
function is described below. The individual function
items are covered in the operating procedures.
1
Select the source
Press the [SRC] button repeatedly also switches
source.
Function items vary from source to source. For a list
of the function items, refer to
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
2
Enter Menu List mode
Press the [MENU] button.
3
Select the setting item
Turn the [Volume] knob and press it when the
desired item is displayed.
Repeat the operation until your desired setup item
is selected.
✍ Press the [MENU] button to return to the
previous item.
Operation example:
3
2
Music
2
Playlists
My
1 1
Artists
Albums
Videos
Play Mode
In this manual, the above selection is indicated as
Select "Music" > "Playlists"
4
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
5
Exit Menu Setting mode
Press the [MENU] button for at least 1 second to
return to the first hierarchy.
Press the [MENU] button in the first hierarchy to
exit the Menu List mode.
<Menu List> (page 72).
4
[Volume] [Volume]
1 2
3
[MENU] [MENU]
3 4
1 sec.
> "My Best 25".
5
|
English