General Operation; Audio Control; Audio Setup; Speaker Setting - Kenwood KDC-MP242 Instruction Manual

General Operation
Audio Control
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the [AUO] knob.
3
Select the Audio item to adjust
Press the [AUO] knob.
Q
~
. Volume offset: Sets each source's volume as a difference
from the basic volume.
4
Adjust the Audio setup item
Turn the [AUO] knob.
S
Exit Audio Setup mode
Press the [AUO] knob for at least 1 second.
Subwoofer level
Bass Boost
"SWl"
"BBOOST"j"BB"
Speaker Setting
System
Q
"NATURAL/"ROCK"/
"POPS"/"EASY"/
"TOP40/ "JAZZ"/
"GAME"/"USER"
- - - - -
Bass level "BAS l" -8 - +8
----'-------'-------
Middle level "MID l" -8 - +8
----'-------'-------
Treble level "TRE l" -8 - +8
----'-------'-------
Balance "BAl" Left 15 - Right 15
Fader "FAD" Rear 15 - Front 15
Exit Audio (ontrol mode (Volume control mode)
b\
~
• "USER": This appears when Bass level, Middle level, and
Treble level are adjusted. When "USER" is selected,
these levels are recalled.
4
Adjust the Audio item
Turn the [AUO] knob.
S
Exit Audio Control mode
Press any button.
Press a button other than the [AUDJ knob.
Audio Setup
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [AUO] knob.
3
Select the Speaker type
Turn the [AUO] knob.
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [AUO] knob.
Switching Display
Changes displayed information on each source
following;
Setting the Sound system.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Setup mode
Press the [AUO] knob for at least 1 second.
3
Select the Audio Setup item to adjust
Press the [AUO] knob.
In Tuner source
Frequency
Clock
In
CD
& External disc source
Low Pass Filter
Volume offset
--=-"LP_F' _ ' _ _ 80/1201160/Through(OFF) Hz
"V-OFF" -8 - ±O (AUX -8 - +8)
6
I
KDC-MP242/KDC-MP142/CR