General Operation; Before Using; Common Operation; Menu List Operation - Kenwood KDC-X994 Instruction Manual

General operation

Before Using

Exit of the Demonstration Mode
Turn off the demonstration mode when you use it
for the first time after installation.
1
Press the [VOL] knob to quit the demonstration
mode when the messages "To cancel Demo
press the volume knob" are displayed (approx. 15
seconds).
2
Turn the [VOL] knob to select "YES" and press the
[VOL] knob.
⁄
• Demonstration mode can also be cancelled in "DEMO
Mode" of Menu List mode. Refer to
Setting> (page 35).

Common Operation

Power and source select
Turns the power ON by pressing the [SRC]
button.
When the power is ON, select a source.
• SRC Select mode 1: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
• SRC Select mode 2: Pressing the [SRC] button
each time switches between sources.
Tuner ("TUNER" or "HD RADIO")
Audio ("BT AUDIO") (KDC-X994, KDC-BT945U
only) USB ("USB") or iPod ("iPod")
➜
("CD") Auxiliary input ("AUX")
➜
("STANDBY") Tuner...
➜
Keeping pressing the [SRC] button for at least 1
second turns the power OFF.
⁄
• The SRC Select mode can be set in "SRC Select" of <Initial
Settings> (page 34).
• Auxiliary input source is initially set to "OFF". Set "Built in
AUX" described in <Initial Settings> (page 34)
• When an optional accessory is connected, the source name
for each device appears.
• When connection of the iPod is recognized, the source
display changes from "USB" to "iPod".
Volume
Turning the [VOL] knob adjusts the sound
volume.
<Demonstration mode
Bluetooth
➜
CD
➜
Standby
➜
to "ON".

Menu List Operation

The basic operating procedure for using this
function is described below. The individual function
items are covered in the operating procedures.
1
Select the source
Press the [SRC] button. Turn the [VOL] knob
and press it when the desired item is displayed.
Function items vary from source to source. For a list
of the function items. Refer to
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Menu List mode
Press the [MENU] button.
3
Select the setting item
Turn the [VOL] knob and press it when the
desired item is displayed.
Repeat the operation until your desired setup item
is selected.
✍ Press the [MENU] button to return to the
previous item.
Operation example:
3
2
Music
2
PlayLists
My
1 1
Artists
Albums
Play Mode
In this manual, the above selection is indicated as
>
Select "Music" "Playlists"
4
Make a setting
• When the " " icon is displayed (at the
PUSH
right edge of the display)
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
• When the " " icon is not displayed
PUSH
Press the [4] or [¢] button to select a
setting value.
5
Exit Menu List mode
Press the [MENU] button for at least 1 second to
return to the first hierarchy. Press the [MENU]
button in the first hierarchy to exit the Menu
List mode.
⁄
You cannot set the item with the " " icon displayed.
•
<Menu List> (page 64).
4
[VOL] [MENU]
1 3
3
[VOL] [MENU]
2 4
1 sec.
>
"My Best 25".
|
English
7