Table of Contents
Advertisement
Function
of
KDC-BT742U
Bluetooth Setup
Registering Bluetooth device
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing). You
can register up to five Bluetooth devices to this unit.
When registering from Bluetooth devices
1
Turn on the control unit.
2
Start registering a unit
by
operating the
Bluetooth device
By operating the Bluetooth device, register the
hands-free unit (pairing). Select "KENWOOD BT
CD/R- 3P2" from the list of connected units.
3
Enter a PIN code
Input the PIN code registered as mentioned in
<Registering PIN Code> (page 28).
Check that registration is complete on the
Bluetooth device.
4
By operating the Bluetooth device, start hands-
free connection.
When registering from this unit
1
Enter Bluetooth device registration mode
Select "MENU"
>
"DVC
REGIST'~
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
Search for the Bluetooth device.
When search is completed, "FINISHED" is displayed.
2
Select the Bluetooth device
Turn the [AUD] knob or push it towards up or
down to select the Bluetooth device.
Press the [AUD] knob to determine the
selection.
3
Inputthe PIN code
0 ' 'u'"
"
'!dl~"
,':t>k"""w
'.'
, ' &
Re@
on_)
)'~ ~a,u_I;:l
, ' /
'il~~¢,'"
l!Iiiii31
Select the numbers.
Turn the [AUD] knob or push it towards
_ _ _ _ _ _ _
",up---,o_rd---,o---:w---,n.~-----,-
_
Move to the next digit.
Push the lAUD] knob towards right.
Delete the last digit.
Push the lAUD] knob towards left.
4
Transmit the PIN code
Press the [AUD) knob for at least 1 second.
If"PAIRING OK" is displayed, registration is
completed.
5
Return to the device list
Press the [AUD] knob.
6
Exit Bluetooth device registration mode
Press the [SEARCH] button.
28
I
KDC-BT742U/ KDC-X493/ KDC-MP442U
~
~
• This unit allows up to eight digits to be input for a PIN
code. If a PIN code cannot be input from this unit, it can
be input from the Bluetooth device.
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
• If the error message appears even though the PIN code
is correct, try <Registering Special Bluetooth device>
(page 28).
Registering Special Bluetooth device
Allow registration of a special device that cannot be
registered normally (pairing).
1
Enter special device registration mode
Select "MENU"
>
"S-DVC
SELECT'~
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
A list is displayed.
2
Select a device name
Turn the [AUD] knob or push it towards up or
down to select a device name.
Press the [AUD) knob to determine the
selection.
If "COMPLETE" is displayed, registration is
completed.
3
Go through the procedure of <Registering
Bluetooth device> (page 28) and complete the
registration (pairing).
Cancelling special device registration mode
Press the [SEARCH] button.
~
• If the device name is not in the list. select "OTHER
PHONE~
Registering PIN Code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Enter PIN code edit mode
Select "MENU"
>
"PIN
EDIT'~
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
The current setting of PIN code is displayed.
Hide quick links:
Advertisement
Table of Contents
