15. Bluetooth SETUP
15.1 Selecting the Bluetooth Device
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1
Press [ Ú ] to enter Bluetooth mode.
2
Turn the volume knob to select
SETTINGS
,
then press the knob.
3
Turn the volume knob to select
PAIRING
, then
press the knob.
4
Turn the volume knob to select
PHONE SELECT
AUDIO SELECT
or
, then press the knob.
5
Turn the volume knob to select a Bluetooth
device name.
6
Press the volume knob to set up the Bluetooth
device.
- "* (device name)": The selected Bluetooth device
is busy.
- "- (device name)": The selected Bluetooth device
is on standby.
- "(blank) (device name)": The Bluetooth device is
deselected.
- If two cell-phones or an audio player have already
been selected, deselect one device before
selecting a new Bluetooth device.
7
Press and hold [6] to exit.
To cancel the Bluetooth mode
Press [ Ú ].
When no device can be selected
• If a cell-phone is already selected, deselect it, and then
select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.
36
|
KDC-X797/ KDC-BT755HD
15.2 Deleting a registered Bluetooth
device
You can delete a registered Bluetooth device.
1
Press [ Ú ] to enter Bluetooth mode.
2
Turn the volume knob to select
SETTINGS
,
then press the knob.
3
Turn the volume knob to select
PAIRING
, then
press the knob.
4
Turn the volume knob to select
DEVICE
DELETE
, then press the knob.
5
Turn the volume knob to select the Bluetooth
device, then press the knob.
6
Turn the volume knob to select
YES
, then
press the knob.
"COMPLETED" appears.
To cancel the Bluetooth mode
Press [ Ú ].
When a registered device is deleted
• When a registered cell-phone is deleted, its phone Book
and log are also deleted.
15.3 Registering the PIN code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Press [ Ú ] to enter Bluetooth mode.
2
Turn the volume knob to select
SETTINGS
,
then press the knob.
3
Turn the volume knob to select
DETAILED SET
then press the knob.
4
Turn the volume knob to select
PIN CODE
EDIT
, then press the knob.
5
Turn the volume knob to select the number.
- To move to the next digit, press [F].
- To delete the last digit, press [E].
6
Press the volume knob to register a PIN code.
"COMPLETED" appears.
To cancel the Bluetooth mode
Press [ Ú ].
Notes on pin code input
• By default, "0000" is specified.
• A PIN code can be specified with up to eight digits.
15.4 Changing the Bluetooth detail
settings
You can change a Bluetooth detail setting item(s)
according to your listening preference.
1
Press [ Ú ] to enter Bluetooth mode.
2
SETTINGS
Turn the volume knob to select
then press the knob.
,
3
Turn the volume knob to select
DETAILED SET
then press the knob.
4
Turn the volume knob to select a desired
setting item, then press the knob.
- See table below for selection.
- Press [ 6 ] to return to the previous item.
To cancel the Bluetooth mode
Press [ Ú ].
Display
Description
PIN CODE EDIT
For details, see
<15.3 Registering the PIN code>
(page
37).
AUTO ANSWER
OFF: Does not answer the phone call
automatically. ; 1 –
8
–99: Automatically
answers the phone call after lapse of 1 – 99
seconds.
RECONNECT
ON: Automatically reconnects the selected
Bluetooth device when radio wave becomes strong
enough, even after it is disconnected. ;
OFF: Not uses auto reconnect.
When this function is turned ON, the Bluetooth
device is reconnected if it has been disconnected
by selecting
PHONE SELECT
/
AUDIO SELECT
AUTO PAIRING
ON: Automatically performs Bluetooth pairing
when the iPhone or iPod touch is connected to the
USB terminal. ; OFF: Not uses auto pairing.
BT HF/AUDIO
FRONT: Outputs audio from the front-left and
front-right speakers. ;
ALL: Outputs audio from the all speakers.
CALL BEEP
ON: Sets whether to output a beep from the
speaker when a call comes in. ; OFF: Not beeps.
BT F/W UPDATE
Display the firmware version and update the
firmware. For how to update the firmware, access
our web site.
www.kenwood.com/cs/ce/bt/
MIC GAIN
-20 —
0
— 8: Adjust the sensitivity of the
microphone for telephone call or adjusts the voice
of the caller.
ECHO CANCEL
1 —
4
— 10: Sets the echo cancellation level.
text: Factory setting)
(Colored
English
,
,
.
37
|