Registering Pin Code; Downloading The Phone Book - Kenwood KDC-BT838U Instruction Manual

Bluetooth Setup
Registering PIN Code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
Downloading the Phone Book
Download the phone book data from the cell-
phone to this unit so that you can use the Phone
Book of this unit.
To
download automatically
If the cell-phone supports a phone book
synchronization function, the phone book is
downloaded automatically after Bluetooth
connection.
Q..
~
• Setting on the cell-phone may be required.
• If no phone book data is found in the unit even after
the compete display, your cell-phone may not support
automatic download of phone book data. In this case, try
downloading manually.
Move to the next digit.
Delete the last digit. Push the Control knob towards left.
To download from the cell-phone manually
1
By operating the cell-phone, end the hands-free
connection.
4
Register a PIN code
Press the Control knob for at least 1 second.
If"Completed" is displayed, registration is
completed.
5
Exit the PIN code edit mode
Press the [FNCI button.
Q..
~
• By default, "0000" is specified.
• A PIN code can be specified with up to eight digits.
24
I
KDC-BT838U
2
By operating the cell-phone, send the phone
book data to this unit
By operating the cell-phone, download the phone
book data to this unit.
• During downloading:
"Downloading" is displayed.
• After completion of downloading:
"Completed" is displayed.
3
By operating the cell-phone, start the hands-
free connection.
To clear
the downloading completion message
Press any button.
~
• up to 1000 phone numbers can be registered for each
registered cell-phone.
• Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetic alphabetical characters.
Fewer characters can be input depending on the type
of characters.)
• To cancel downloading of the phone book data, operate
the cell-phone.