Before You Start Using Your T-Box - Telstra T-BOX User Manual

Before YoU sWitCH YoUr t-BoX
IMPORTANT: before disconnecting the power supply, first turn your T-Box off.
• P ress the power button on the remote for 3 seconds until you see the on-screen
message 'Entering sleep mode; please wait.' Only when the T-Box powers down,
is it safe to then switch off from the power point
• N ever pull the cord out of the T-Box directly as it could cause issues with your
T-Box hard-drive
• A void connecting too many devices to the same electric power source, otherwise
you could cause an overload that leads to electric shock or a fire
• O nly use the power supply cord provided with your T-Box. This cord should not
be used for any other devices
• D o not connect your T-Box to a non-standard Australian power point
• M ake sure you push the power supply plug right into the power point. A poor
connection could cause an electric arc, shock or fire
• W henever you disconnect the power supply, first switch off the power point and
then pull the plug out by the adaptor block – never by the cord
• T he power point is used to turn off the T-Box so make sure you'll have easy
access to the switch

Before YoU start UsinG YoUr t-BoX:

• When you're not using your T-Box, leave it in standby mode
• D uring storms, and when you leave your home for a long period, we recommend
disconnecting your T-Box from its power supply
• M ake sure you disconnect your T-Box from the power supply before you clean it
• T he surface can be cleaned with a soft, slightly damp cloth – but do not use any
abrasive or alcohol based products
IMPORTANT: There is a risk of explosion if you use the wrong type of battery.
Take the old battery as a sample when you purchase a replacement, and ask
a specialist for advice if you're not sure.
04
on or off:
®