Reset Options - Telstra T-BOX User Manual

reset oPtions

You'll find the Reset button on the bottom of your T-Box
problems with your T-Box, pressing this button will reset it.
Reset button
If you press and hold the Reset button while watching the light on the front
of your T-Box, you can activate a couple of other Reset options:
Re-Start
Press Reset Once.
Restarts your T-Box. Your
T-Box will power off as soon
as you release the reset
button. Press the 'power'
button on the remote control
to turn it back on.
Before disconnecting the power supply, first turn your T-Box off
WARNING:
by putting it in deep sleep mode. Press the power button on the remote for 3
seconds until you see the on screen message 'Entering sleep mode; please wait'.
Only when the T-Box powers down is it safe to switch off from the power point.
Never pull the cord out of the T-Box directly as it could cause issues with the hard
drive of your T-Box.
Remote Pairing
Press Reset Two Times.
Resets the remote control
pairing, so that you can
re-pair your existing remote
control or pair a new remote
control to your T-Box.
. If you run into
®
Reset
Press Reset Five Times.
Erases all settings so you can
re-run the entire
set-up process.
No recordings or movies are
deleted.
Recordings currently in
progress are stopped.
43