Tune In Digital Free-To-Air Tv - Telstra T-BOX User Manual

tUne in DiGital free-to-air tv

The easiest way to tune in all your available free-to-air digital TV channels is to use
the automatic tuning function on your T-Box
Before you start the automatic tuning, make sure your T-Box is correctly connected
to your TV aerial.
Usually, there'll be a socket in the wall that connects to an external TV aerial. Just use
the TV aerial cable that came with your T-Box to connect the T-Box to this socket. When
connecting the TV aerial cable to a female wall socket you will need to use the included
adaptor – then:
• S tart the automatic search by pressing OK on the Channel Tuning screen
• W ait until the automatic search has been completed
• I f there are several signals for the same channel, your T-Box will only display
the one with the strongest reception
• I f you're connected to the internet through BigPond
will also be included automatically in your TV Program Guide
• C onfirm that you've finished with the search, or search again if necessary
Note: Before you install your T-Box, make sure that your external TV aerial
provides good reception for digital TV. You may need to change or reposition the
aerial in some cases.
Reception of high definition channels and programs is only possible in certain areas, and
only on TVs, that are HD Ready or Full HD and connected to your T-Box with the HDMI
cable. If you need to know more about HDTV, please ask your TV retailer, manufacturer or
installer. For more information on digital reception in your area please visit:
www.digitalready.gov.au
.
®
, the BigPond TV channels
®
19