Trouble With Your Picture - Telstra T-BOX User Manual

channels can be recorded at the same time, with another channel from another
broadcaster, eg ABC1 recorded.

troUBle WitH YoUr PiCtUre

I can't see anything on my TV screen
• C heck that your T-Box
of your T-Box should be on when it's working)
• M ake sure your T-Box is connected to your TV properly
• M ake sure you've selected the right input or source on your TV. Press the
button marked 'Input' or 'Source' on your TV remote and choose the input
you plugged your T-Box into (e.g. HDMI or AV1)
• T ry resetting your T-Box by pressing the reset button on the bottom of the T-Box once
Note: If you are setting up your T-Box for the first time it may take some time
for the TV to recognise the T-Box signal. Wait a few minutes before moving to
the next step.
The picture quality on my TV isn't very good
•Make sure that you've used the right HDMI video or RCA cables for your TV set
• M ake sure that you have selected the correct settings selected by
following these steps:
• go to the Settings Menu
• select Video Setup by arrowing across
• check the display format is appropriate for your TV
• check the TV resolution by selecting the TV resolution option which
matches the cables you have used to connect your TV to your T-Box e.g.
HDMI or Composite/Component
• choose the best TV resolution setting for your TV. You may need to try
different resolution settings to determine the best result. To assist you
with this step you may need to check your TV manual.
I've activated a subtitles or a language option and nothing is happening
These options (and the information about them) are broadcast by the free-to-air
TV channels so they may not be available. Go to the Settings Menu, select Display
Settings and then choose Subtitles preferences. If you want to turn subtitles or
closed captions on then ensure you have chosen 'English' not 'None'.
is powered up and working. (The light on the front left
®
55