Security - E-Lins H685 Series User Manual

3.6.8.5 Security

 SSH access from WAN: allow or deny users access H685/H685 router from remote side.
 Ping from WAN to LAN: allow or deny ping from remote side to internal LAN subnet.
 Enable telnet: enable telnet connect. The default setting is disabled for security.
 HTTPS port: set HTTPS port, the default port is 443.
 HTTPS access from WAN: allow or deny access router web management page from remote
side.
 Remote network: Any IP Address, Single IP address, Subnet.
 IP address: fill a remote IP address that can access router web management page.
 Netmask: 24 means net mask 255.255.255.0, 32 means 255.255.255.255, the illegal value is
from 1 to 32.
 HTTP port: set HTTP port, the default port is 80.
 HTTP access from WAN: allow or deny access router web management page from remote
side.
 Remote network: Any IP Address, Single IP address, Subnet.
 IP address: fill a remote IP address that can access router web management page.
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: sales@e-lins.com
H685 User Manual
www.e-lins.com