H800 User Manual
Operation Mode
The router operation mode and NAT select. There are three operation modes supported:
bridge mode, gateway mode, AP client mode.
Internet settings
Wide Area Network (WAN) Settings
Step 1: fill in MSP APN Parameters, then click "Add to List"
Please be notes that input the Initial Command String as the picture shows
For example: at+cgdcont=1,\"IP\",\"CMNET\"
The comma and character "\" must be contained, otherwise H800 will not dialup to
network.
Step 2: Select the MSP APN from "MSP List", click ""
E‐lins Technology Co.,Limited
Add: Bld.22, Longxi Garden, Nonglin Road, Futian District, Shenzhen, 518000, China
Tel: +86‐755‐83700465 E‐mail: sales@e‐lins.com www.szelins.com