Single Polling - Toshiba TF 831 Manual

Polling

Single polling

If your fax partner has reserved a
document for polling, you can poll the
document using the procedure described
in the following.
If you would like to use the delayed polling delayed polling delayed polling delayed polling delayed polling
facility, you must first carry out the steps facility, facility, facility, facility,
described on page 89 before proceeding
as follows.
62
GB
Polling
15-03-97 SAT 19:56
TRANSMIT AVAILABLE
RESIDUAL MEMORY 100 %
LOAD DOCUMENT
START
LOAD DOCUMENT
IF POLLING
PRESS [START]
START
POLLING
SECURITY CODE ?
1.YES
2.NO
WITHOUT PROTECTION WITH TOSHIBA CODE
Go to A
A
WITHOUT
PROTECTION
B
WITH
TOSHIBA CODE
POLLING
SECURITY CODE=
START
Standby mode
Enter the fax number of the fax
machine from which you wish to
poll
Confirm with START
Confirm with START
Make your selection
for polling protection
1. with TOSHIBA code
2. without polling protection
Select a menu item
without protection (A) with TOSHIBA
code (B)
Go to B
The polling procedure is stored as a job
and carried out.
nnnn
Enter the TOSHIBA code
Confirm with START
The polling procedure is stored as a job
and carried out.
TOSHIBA TF 831/861