Single Feed Mode - Toshiba e-Studio 5560c Copying Manual

2.HOW TO MAKE COPIES

Single feed mode

When the feeding mode is set at "single feed mode", an original is fed automatically as it is placed on the RADF. It is useful
when you want to copy only 1 original sheet.
P.120 "ADF -> SADF"
1
Align the side guides to the original length.
2
Insert the original with its face up and straight along
the side guides.
The original is automatically pulled in and then the menu of step 3 will
be displayed on the touch panel.
Be sure to let go of the original when it starts being pulled.
3
If there is another original, insert it in the same way.
4
After all the originals are pulled in, press [JOB FINISH].
If you want to stop copying, press [JOB CANCEL].
2 HOW TO MAKE COPIES
Placing Originals 29