Table of Contents
Advertisement
Installation
The menu system
Your fax machine is equipped with a four-
line display which provides you with infor-
mation concerning all operating modes.
This display makes it more easy for you to
work with the various functions of your fax
machine, and everything is set out in a
clear menu. Up to four menu items are
displayed on each occasion, and a
number is assigned to each of these
items.
A special group of keys is used for acti-
vating the menu as well as for control
activities within the various menu levels.
The
key activates the menu and moves
the highlight bar up.
The
key moves the highlight bar down.
The
key selects the appropriate
submenu level.
The
key selects the superior menu
level.
Once a menu item has been selected
with the highlight bar via these control
keys, it is activated by pressing the ↵(EN-
TER) key. Alternatively, you can use the
START key for this purpose. It may well
happen that more than four items are
displayed in one menu. In this case, press
the
/
control keys several times to
display these concealed menu items.
Example: Menu 3, 1 (Installation, Setup,
1. Menu item highlighted)
1. AUTO RECEIVE MODE
2. LANGUAGE
3. TERMINAL ID
4. DATE & TIME
visible part
5. DIAL TYPE
6. VOLUME
7. POWER SAVER
8. DEPARTMENT CODE
9. ACCOUNT CODE
10. COVER SHEET
10
GB
Installation
15-03-97 SAT 19:56
TRANSMIT AVAILABLE
RESIDUAL MEMORY 100 %
LOAD DOCUMENT
1.COMM. OPTIONS
2.LISTS
3.INSTALLATION
4.MENU LIST
3x
1.COMM. OPTIONS
2.LISTS
3.INSTALLATION
4.MENU LIST
ENTER
or
START
or
15-03-97 SAT 19:56
TRANSMIT AVAILABLE
RESIDUAL MEMORY 100 %
PRINTING LIST
One version of the menu selection procedure is to
enter the corresponding number of the particular
menu item. It is not necessary to press the INPUT
button. As soon as the relevant number has been
entered, the menu item is executed. This is also
applicable for the concealed menu items.
When entries are being made, it is not
possible to receive. Because of this, the
machine returns to idle status if no entry
is made within one minute.
Consider the following example in order to familiar-
ise yourself with the menu system. The system
prints out the program selection list, on which
you receive the complete menu structure of your
fax machine.
Standby mode
Start the menu
The first 4 menu items are displayed.
Select a menu item
Select a menu item
To select a sub menu, there is
no need to see it in the LCD.
The only requirement is that this
menu item has to be in the same menu
level.
The report is printed.
TOSHIBA TF 831/861
Advertisement
Table of Contents
