Set Resolution - Toshiba TF 831 Manual

Transmit documents

Set resolution

In its basic setting, your fax machine uses
high resolution for transmitting or copying
your documents. You can also adjust the
resolution to suit the particular
documents. Use the following as a rough
guide:
STD (basic setting)
For hand-written or typewritten
documents
FINE For documents with small type
such as newspapers and
diagrams
SF For documents with very small
and detailed diagrams
GREY 64 grey stages for photographs
or colour documents
For the grey stages, you can
choose between fine and super-
fine (SF)
If the resolution is increased or if
the grey stage mode is selected,
the transmission time is length-
ened (this involves additional costs!), as
more lines or more information are trans-
mitted.
*) Please refer to page 104 if you wish to
change the BASIC SETTING for
resolution.
44
GB
Transmit documents
15-03-97 SAT 19:56
TRANSMIT AVAILABLE
RESIDUAL MEMORY 100 %
LOAD DOCUMENT
15-03-97 SAT 19:56
TRANSMIT AVAILABLE
RESIDUAL MEMORY 100 %
ENTER TEL NUMBER
MODE
FINE
U-FINE
HALFTONE
Standby mode
Load original
Remember:
Printed side face down
Document ready
Press „MODE"
Press the RESOLUTION key several times
to make the required setting.
The setting selected in this way is only
applicable for the current job. When the
document has been read in, the resolu-
tion is reset to the default value.*
Dialling the fax partners
TOSHIBA TF 831/861